need info on defender diff

[scotyp]

Hi all,

I have a 96 defender 130 and have an been offered a diff lock out of a 91 disco, would either the front or rear diff be compatable,

thanks in advance :)

scottyp

[rovercare]

Its most definately not compatible with the rear, but is with the front, with a few exceptions, did it have aftermarket replacement axles at all? as in, iis the locker 10 or 24 spline?

[Psimpson7]

Hi all,

I have a 96 defender 130 and have an been offered a diff lock out of a 91 disco, would either the front or rear diff be compatable,

thanks in advance :)

scottyp

Afraid not Scotty.

The Defender will be 24 spline where as the disco will be 10 spline, and the disco rear is a rover axle, whereas the Defender is a Salisbury.

It is the right design for the front, but the splines are wrong.

I think you can buy the parts to swap the 10 spline locker to a 24 spline one, but I dont know the details. (Arb at least)

Rgds
Pete

[rovercare]

Afraid not Scotty.

The Defender will be 24 spline where as the disco will be 10 spline, and the disco rear is a rover axle, whereas the Defender is a Salisbury.

It is the right design for the front, but the splines are wrong.

I think you can buy the parts to swap the 10 spline locker to a 24 spline one, but I dont know the details. (Arb at least)

Rgds
Pete

Personally, if going that route, your better off purchasing heavy duty 10 spline axles for about double the cost of converting to 24spline gears

[scotyp]

Thanks guys for your help,

the 10 and 24 spline sounds like an obstacle, next qusetion is could I swap the complete diff and axles from the disco rear with the front of the defender

Much appreciated
thank you

scottyp

[Psimpson7]

again, no I am afraid.

The rear axles and front ones are different even when both are rover axles. The front ones are 2 piece with a CV joint to allow for the steering.

Rgds
Pete.

[scotyp]

doh !

thanks mate

[long stroke]

Hi there:)
If you don't get it we could be interested in it!!!
So if you end up not getting it could you let me know?:angel:

CHEERS TIM.

[scotyp]

Hi there:)
If you don't get it we could be interested in it!!!
So if you end up not getting it could you let me know?:angel:

CHEERS TIM.

no worries Tim, might take a while though

Cheers :)

[long stroke]

Righto then:)
How much is he asking??:)
Oh i better ask if it will fit the 10 spline front of our county, anybody know i think it should;)

CHEERS TIM.

[scotyp]

Righto then:)
How much is he asking??:)
Oh i better ask if it will fit the 10 spline front of our county, anybody know i think it should;)

CHEERS TIM.

not sure yet, said I could have it, just got to pick it up from bowen

cheers