bits n pieces.... whos got this obscure stuff?

[Blknight.aus]

ok has anyone out there got any of the following bitsn pieces.

1. the selector collar for the dual PTO that is a chain drive and outputs both front and rear. I need the bit that the selector for moves to make the engagement, mines missing.

2. a series radiator thats setup with a thermo fan that I can get some pictures of it as Im starting to toy with the thermo fan idea.

3. A din frame that I can butcher up into fozzys dash so I can mount the stereo.

4. the strengthening plate that goes onto the rear cross member to help support the tow gear and (needed so I can get measurements to fabricate one for fozzy)

5. the adaptor plate that mounts the pintle, sort of like the strenghtening plate but it goes on the back between the chassis and the pintle, (same deal I need it for measurements only)

[incisor]

i can help with 4 and 5

the thermo as well, maybe...

[Redback]

Nuh sorry all out of those, "I got a slug"

[Treads]

I've got a #3 you can have :)

[JohnE]

with 5 you mean the bit with the legs on it?
if so me too.

john

[OLR-067]

I'm chasing 2 pintle mounts if any are available after Dave...

Paul

[p38arover]

I probably can't help but I do have an output shaft from a PTO on my IIA

You can just see it here:

http://www.aulro.com/apc/showfull.php?product=444&bigimage=siia-4.jpg
https://www.aulro.com/afvb/

[Blknight.aus]

i can help with 4 and 5

the thermo as well, maybe...

Outstanding


I've got a #3 you can have :)

Cheers


I'm chasing 2 pintle mounts if any are available after Dave...

Paul

IF they work out easy enough I'll fab up a stack


I probably can't help but I do have an output shaft from a PTO on my IIA

You can just see it here:

1968 Series IIA Trayback - AULRO Classifieds (http://www.aulro.com/apc/showfull.php?product=444&bigimage=siia-4.jpg)
http://www.aulro.com/apc/showfull.php?product=444&bigimage=siia-4.jpg

yep, thats got the PTO unit on the back but I need the bit that does its magic inside the TCase.


Pms are coming.

[Blknight.aus]

with 5 you mean the bit with the legs on it?
if so me too.

john

its got legs on it?


AFAIK its just a plate that the normal tow mount bolts connect to and is drilled to take a pintle hook.

[JohnE]

mate
thats my description, ducked over to the shed to show you,
the bit on the right


https://www.aulro.com/afvb/images/imported/2009/01/810.jpg


it has legs!


john

[Blknight.aus]

thats the very ones...

the plate that youve only got half the picture off is the backing plate.

the plate with the spacers (legs) is the pintle adaptor plate.

cheers. any chance I can borrow/convince you to part with those ones?

[JohnE]

you can borrow them, i am not using them yet.

If you are by chance going to richards(69gs) tomorrow you can grab them then otherwise we can come to an arrangement.

I'll put them in the back of the car tomorrow morning just in case.

john

[Blknight.aus]

sadly thats not on the cards but thinking on it 69gs should have a set I can borrow at pretty much any time.

Cheers for the effort tho.

[JohnE]

no worries,
i'll put them in the car just in case, i'll mention it to richard tomorrow , to make sure he has the required bits. otherwise i can leave them with him if you like.


john

[Blknight.aus]

cheers, he has some other stuff I need to pick up from him but Im just waiting on some people to pick some stuff up from me so I can clear the room for it.

[incisor]

i can get them from richard and drop them to you dave as i need to come see you shortly....

[Blknight.aus]

that works for me inc, it will have to be before jan 30 or after mid feb as Im going down to wagga to learn aircon.

[digger]

I'm chasing 2 pintle mounts if any are available after Dave...

Paul

Oh oh....me too me too...

actually I mean, yeah two for me too! thats spacers AND plates (pleeeeease?):D

if not can someone do a spec drawing so I can get someone I know to knock one/s up?

cheers (& beers)
digger

[JohnE]

the day started off okay i got them out of the shed and put them?

on the chair on the front veranda and left them there.
Did mention it to richard though and he thinks he has one somewhere!

But thought the same as digger, I can do a template for the strengthening plate and the spacer, measure the thickness, and the spacer 'legs'

will do it later and send them off to you
john

[isuzurover]

2. a series radiator thats setup with a thermo fan that I can get some pictures of it as Im starting to toy with the thermo fan idea.

I used a Subary MY (80's MY, not the 00's one) fan on mine for a while. Covers about 2/3 of the rad from memory. Didn't work as well as the original Military fan, so I swapped back. At one point I even tried the subie fan behind the rad and a nissan (pulsar?) fan in front of the rad.