35" on a 130?

[94defenda]

Hi everyone,

Just wondering if anyone was running 35's or equivalent on their fenda and how much lift/ trouble they went to to make them fit. Also wat offset is needed?

Cheers, Tim

[DeeJay]

I have run 34" on my 2" lifted County, no probs, others on this forum will say the same, however the problem you might encounter is whether the cops will want to see an engineering approval.
My engineer would'nt do it, saying uniform laws are in and 50mm is the max.There is an overall 25mm increase in inside track max in Vic too.
I'd check with the authorities & there seems to be a lot of oversize tyres selling on ebay lately.

[Psimpson7]

35's will go on with a 2" spring lift. as said above be aware of the legalaties

[94defenda]

thanks guys. yeah i'm guessing that they will probably not be legal. just hoping a land rover wont attract much attention next to some of the 6inch lifted patrols with 37's and the like getting round town:angel:

cheers, tim

[Outlaw]

yep fit well with a 2" lift ;)
https://www.aulro.com/afvb/

[94defenda]

thanks for the pic mate. are those rims 15" sunraysias? how wide are the tyres and wat offset are those rims?

cheers, tim

[Psimpson7]

They are 8x15 Dynamics

Tyres are 35x11.5 x 15. Wheel offset I cant remember.

(I know the answers as they are my wheels and tyres :))

[94defenda]

They are 8x15 Dynamics

Tyres are 35x11.5 x 15. Wheel offset I cant remember.

(I know the answers as they are my wheels and tyres :))

sorry mate what did you mean by 'i know the answers'?

[Psimpson7]

sorry mate what did you mean by 'i know the answers'?

I was just trying to explain why I was answering the question posted to Josh;)

[94defenda]

I was just trying to explain why I was answering the question posted to Josh;)

oh rightio, thanks for the help mate. good to see a pic of something very similar to wat i wanted to do.

cheers, tim

[rick130]

I have run 34" on my 2" lifted County, no probs, others on this forum will say the same, however the problem you might encounter is whether the cops will want to see an engineering approval.
My engineer would'nt do it, saying uniform laws are in and 50mm is the max.There is an overall 25mm increase in inside track max in Vic too.
I'd check with the authorities & there seems to be a lot of oversize tyres selling on ebay lately.

So that means that if the supposedly uniform new rules (NCOPS ?) are strictly applied and 235/85's are taken as approximately somewhere in the 800-810mm overall diameter range new (approx. 31.5-31.7") the tallest tyre you can legally fit is something like a 255/85 at 846mm/33.3" tall or the 285/75 at around the same height.

Has anyone tested that yet ?

[DeeJay]

So that means that if the supposedly uniform new rules (NCOPS ?) are strictly applied and 235/85's are taken as approximately somewhere in the 800-810mm overall diameter range new (approx. 31.5-31.7") the tallest tyre you can legally fit is something like a 255/85 at 846mm/33.3" tall or the 285/75 at around the same height.

Has anyone tested that yet ?

Having just had my Project Landie engineered, & I tried to get approval for my 34" swampers from the VicRoads approved engineer - I pretty much got stonewalled from him- he said no exceptions anymore.:(

[Outlaw]

34's should just make it in on a fender/county... i thought the new rules were 50mm extra (but can't find it on the site)

[aew849]

Back on 26 Jun 07 HAK introduced this topic in the Technical Tips forum. There was good info and chat.

aew849
04 130 HCPU with spanking BFG MT's 255/85....cured the 5% speedo over read quite nicely!

[blue juice]

yep fit well with a 2" lift ;)
http://www.aulro.com/afvb/attachments/gclro-general/12843d1232105496-any-defenders-gold-coast-img_3476.jpg

GOD DAM Nice !!!!!! is that located on the gold coast ?

[blue juice]

Outlaw are you located on the gold coast and what did that cost you to put the wheels and tyers on.
If you are in the area what is the next meet for the gold coast club and are there similar rigs in the club
cheers

[Outlaw]

Heya Blue Juice... yep i'm on the GC and next meeting is this thursday at Hinterland Hotel (http://www.aulro.com/afvb/gclro-general/23082-gclro-meetings-1st-thursday-monthly.html) (first thursday monthly).

Are a few decent modified landies depending on what you're into... those tyres in the above pic are actually PSimpson7's... was testing them before purchasing... as of 8.30am yesterday morning this is mine :D:D:D Will need a touch cuttung and moving out the flares though... 35x12.5x15 claws on -22 offset 15x8 dynamics

https://www.aulro.com/afvb/

[Mikey0211]

Heya Blue Juice... yep i'm on the GC and next meeting is this thursday at Hinterland Hotel (http://www.aulro.com/afvb/gclro-general/23082-gclro-meetings-1st-thursday-monthly.html) (first thursday monthly).

Are a few decent modified landies depending on what you're into... those tyres in the above pic are actually PSimpson7's... was testing them before purchasing... as of 8.30am yesterday morning this is mine :D:D:D Will need a touch cuttung and moving out the flares though... 35x12.5x15 claws on -22 offset 15x8 dynamics

http://www.aulro.com/afvb/attachments/gclro-general/13279d1233389288-oh-im-infactuated-once-again-0.jpg

Would be interested in seeing what your gonna do about moving the flares out... I've got similar offset rims and they stick out about 2" further than the original flares... I just havent been able to think of a way to extend them out..

Do you know how your gonna do it yet...? Would love some tips:)

[Outlaw]

PM sent Mikey

[blue juice]

Back on 26 Jun 07 HAK introduced this topic in the Technical Tips forum. There was good info and chat.

aew849
04 130 HCPU with spanking BFG MT's 255/85....cured the 5% speedo over read quite nicely!

Nice pic of the sign and 130 ! Can you place some of the tyers and 130 from side on .
Cheers Blue

[blue juice]

Would be interested in seeing what your gonna do about moving the flares out... I've got similar offset rims and they stick out about 2" further than the original flares... I just havent been able to think of a way to extend them out..

Do you know how your gonna do it yet...? Would love some tips:)

Hi mikey0211.
Would like to know if you have thought of a way with the guards yet.
And where do you get the flares for the rear ?? have been looking but can not match the front flares yet
Cheers blue