PDA

View Full Version : blend motors



Romulus
28th January 2009, 02:48 PM
Hi,

has anyone here replaced the 3x blend motors used for the aircon/heater in the P38?
I've heard its a bit of a job as a lot of the dash needs to be removed in order to replace them.
Thanks for any input.

p38arover
28th January 2009, 09:41 PM
John Brabyn and I have done a partial write up on how to do this at:

Blend Motor Diagnosis and Replacement (http://www.rangerovers.net/repairdetails/blendmotor.html)

PaulP38a
28th January 2009, 10:31 PM
John Brabyn and I have done a partial write up on how to do this at:

Blend Motor Diagnosis and Replacement (http://www.rangerovers.net/repairdetails/blendmotor.html)

And a damn fine write up too Ron. I haven't had the "pleasure/pain" of doing this yet, but if/when I do this is the guide I will use rather than paying a mechanic a couple of $k to do it for me - as I did for my last P38A.

cheers, Paul.

p38arover
29th January 2009, 05:05 AM
Thanks Paul. :)

Mine lacks the write up on doing the LHS unit. I'll write that up one day. However. I did that one when I did the dash change over.