PDA

View Full Version : turbo up grades, of sorts



stig0000
29th January 2009, 06:15 PM
well on my 04 td5 i want to up the boost a little,,, an put a boost gage on it ,, an also for fun a blow of valve,, so i get that nice nosie when it spools up:p an when i back off, so that are my Qs,, wats the best an easyest way to put a boost gage on an make that wisel noise????

Leo109
29th January 2009, 06:40 PM
Forget the blow-off valve. They won't work on a diesel because there's no throttle valve to close and cause a pressure spike in the manifold.

If you want blow-off valve noises, I think you bought the wrong vehicle...

Ian

stig0000
29th January 2009, 07:14 PM
ohk,,, it was only going to be for a joke,,, what about the boost gage then?

discowhite
29th January 2009, 07:17 PM
joke alright! only no one was laughing:p

tee into the waste gate hose for the boost gauge its the easiest way. and for upping the boost, unless you get a boost compensation box and and upgraded ECU and mods, then you wont be able to up it to much. 1-2psi depending.

cheers phil

stig0000
29th January 2009, 07:29 PM
joke alright! only no one was laughing:p

tee into the waste gate hose for the boost gauge its the easiest way. and for upping the boost, unless you get a boost compensation box and and upgraded ECU and mods, then you wont be able to up it to much. 1-2psi depending.

cheers phil

oh ok,, yer i was looking to day at it,, an that looked like the easyest way,, but if enyone has enother way,, oh an whats a good price for a small basic gauge, were from- repco??