Nanocom diagnostic readings

[Grumpy]

I have just purchased a Nanocom unit and have a couple of queries.

1. What is meant by the wording " cylinder balance values?

2. The unit comes up with an operating voltage of 13.5v +/-. Starts around 13.9volts then quickly drops.

I thought if that is the voltage going into the battery it should have been it should have been around 14.2 or so volts continueous. Maybe I am thinking on the wrong channel.

Tony :wheelchair:

[Psimpson7]

thread on cylinder balance readings

http://www.aulro.com/afvb/technical-chatter/66366-td5-cylinder-balance-readings.html

With regard to the voltage it will drop so thats fine. Put a multi meter on the battery and you will see.

[Grumpy]

thread on cylinder balance readings

http://www.aulro.com/afvb/technical-chatter/66366-td5-cylinder-balance-readings.html

With regard to the voltage it will drop so thats fine. Put a multi meter on the battery and you will see.



Thanks for that, I looked at the previous threads--must have missed it.
Thanks again.

Tony

[wozzlegummich]

Hi Grumpy, Can I ask where did you get your nanocoma and how much did you pay?

Cheers,

Robbie

[Grumpy]

Hi Robbie,

Sorry for the delay, have been away down our South Coast for a month.

The Nannocom was obtained from Rovacraft over here in the West.

Tony :wheelchair:

[Redback]

Hi Grumpy, Can I ask where did you get your nanocoma and how much did you pay?

Cheers,

Robbie

$499 + $10 postage from Rovacraft Sydney, Melbourne or Perth.