PDA

View Full Version : Changed These Yesterday


Redback
16th March 2009, 10:07 AM
They were bent a bit causing the bushes to flog out:D

http://img.photobucket.com/albums/v293/bazzar/DSC03939.jpghttp://img.photobucket.com/albums/v293/bazzar/DSC03937.jpg

Baz.
Pedro_The_Swift
16th March 2009, 10:13 AM
Thats only half the story Baz


dont tell me you put STANDARD ones back on:o
McDisco
16th March 2009, 10:19 AM
Gees Baz, how did you do that? They look like solid arms in the first place...actually better check mine. Never checked them for straightness...

Does anyone actually make upgrade front control arms?

Angus
discowhite
16th March 2009, 12:24 PM
Gees Baz, how did you do that? They look like solid arms in the first place...actually better check mine. Never checked them for straightness...

Does anyone actually make upgrade front control arms?

Angus

hes really good to use as an R&D tester! if he cant break it its bullet proof;) and someone in the uk was making alloy front D2 arm...

cheers phil
that_kid
16th March 2009, 12:39 PM
les richmond makes heavy duty castor corrected front arms for the D2
long stroke
16th March 2009, 03:52 PM
Are they front or rear?
I think the rears in the d2 are similar to the front (not the tube style;))
You must drive that d2 pretty hard:o
Redback
16th March 2009, 06:09 PM
Thats only half the story Baz


dont tell me you put STANDARD ones back on:o

Yes Pedro standards back in:D


Gees Baz, how did you do that? They look like solid arms in the first place...actually better check mine. Never checked them for straightness...

Does anyone actually make upgrade front control arms?

Angus

QT Services make castor corrective front arms for a D2.

Don't know how I bent them Angus, so many places, so many big thumps:twisted:


hes really good to use as an R&D tester! if he cant break it its bullet proof;) and someone in the uk was making alloy front D2 arm...

cheers phil

One word Phil................Marickville:p


les richmond makes heavy duty castor corrected front arms for the D2

QT Services too


Are they front or rear?
I think the rears in the d2 are similar to the front (not the tube style;))
You must drive that d2 pretty hard:o

Aaaahhhh yes, I used too, I've tamed things down a bit, because of this type of damage.

Front and rears are the same type, these are rears

Makes you wonder about the last 2 wheel alignments done on the car:eek:

Baz.
Slunnie
16th March 2009, 09:12 PM
I've bent mine also, but like you I think the bushes flogging out is from using them offroad heaps and articulating them until they wont articulate any further. I bought some replacements from Bundalene.
Redback
17th March 2009, 11:43 AM
I've bent mine also, but like you I think the bushes flogging out is from using them offroad heaps and articulating them until they wont articulate any further. I bought some replacements from Bundalene.

Yes I also got mine from Erich, he is the master D2 parts guy:D

Baz.