TD5 2001 Build vacume line

[scott oz]

Gentleman,

First post but done a lot of reading.

I've removed my EGR including the water cooler and now I wish to replace the vacuum line with I believe the earlier one which has no "T" taking a line off to the former EGR (eventually).

While I can simply remove the line and "Plug" it I'd prefer to do it right and have an unbroken pipe/line.

Problem is LR say I need the part number or VIN number neither of which I have.

Anyone able to provide me with a part number. Thanks

[Scouse]

You don't have a VIN?
What's the engine fitted to?

[ladas]

You don't have a VIN?
What's the engine fitted to?


What he said ^^^^^^^^^^^

[Psimpson7]

As far as I know they all have the vacuum take off for the EGR

[BigJon]

You don't have a VIN?
What's the engine fitted to?

My understanding is he wants a VIN from an early build TD5 powered vehicle to get the vacuum line part number.

Lazy dealer should just look the part up, I used to all the time.

[Scouse]

My understanding is he wants a VIN from an early build TD5 powered vehicle to get the vacuum line part number.

Lazy dealer should just look the part up, I used to all the time.OK, here's a part number from a lazy dealer:
MSP101180 (pipe - solenoid valve).

I assume that's the one as it was only used up to XA222500.

[scott oz]

Scouse,
Thanks I'll try tomorrow and see how I go.

Pushing my luck but does anyone know a third party importer of LR parts. I got a genune non genuine non cat exhaust of a mob at penrith Brit something but cant find their number now I need it again. They were 1/2 the price the dealer quoted.

[Scouse]

I don't know anyone at Penrith. There's BMI at Mulgrave & Karcraft at Silverwater.

[scott oz]

Scouse,
BMI, what does that stand for so I can look them up. ALto say there is no part number MSP101180 . Good thing is, I'm almost on a first name basis with the bloke.

[Scouse]

Scouse,
BMI, what does that stand for so I can look them up. ALto say there is no part number MSP101180 . Good thing is, I'm almost on a first name basis with the bloke.British Motor Imports, (02) 4587 7807

MSP101180 exists on the LR system, you should have called Trivetts ;). $16.56 list but nil stock.
Try BMI or Karcraft.

[Psimpson7]

Not convinced that is what he is after.

that number is

Discovery egr valve pipe msp101180 new genuine. su eBay.it Land Rover, Car Parts, Cars, Parts Vehicles (http://cgi.ebay.it/Discovery-egr-valve-pipe-msp101180-new-genuine_W0QQcmdZViewItemQQitemZ120384624827)

I'm guessing what he is after is the hard vacuum pipe at the base of this picture.

https://www.aulro.com/afvb/images/imported/2009/03/778.jpg

[Scouse]

I'm not familiar with the ins & outs of the Td5 so I was just going by the parts list. That's the only pipe that seems to change with early Td5s.

I can't see your picture from where I am at the moment either so that doesn't help :(.

[scott oz]

Psimpson7 and Scouce,

Yep did try Trives and most helpfull and found the number but said it was for a discovery and hence not sure it will fit a Defender. they also confirmed none in OZ. Karcraft the same.

Now I'll try the link to Ebay.

Psimpson that's the pipe but needs to go on a Defender (Getting closer)

[Psimpson7]

That pic I put up is on my 01 D90

[Scouse]

I have 2 Defender hose numbers:
WAP100970
WAP100980 (filter to EGR according to the picture)

I'll have to check Psimpson's picture tonight.

[Tombie]

Early TD5 still had vacuum take off on the hard plastic line.

Just plug the ports with rubber caps...

Interestingly, a 2001 usually doesnt have an EGR cooler either :o

[Psimpson7]

Early TD5 still had vacuum take off on the hard plastic line.

Just plug the ports with rubber caps...

Interestingly, a 2001 usually doesnt have an EGR cooler either :o

Re the pipe, thats what I thought too.

[scott oz]

Yep,

It's looking more like a "plug" solution. The MSP1001180 (refer ebay) is the line I'm trying to elinminate.

I'll do a bit more research and see how I go. Let everyone know in any event. British Motor Sports most helpfull.

[scott oz]

So close

In this link you can see the line

http://irbdevelopments.com/Td5egr.html (http://irbdevelopments.com/Td5egr.html)

I’m led to believe that this is a standard part. If they had it made up then it looks like the “plug solution”.

[Scouse]

Email sent.

[scott oz]

OK I've now been told that the Vacuum line replacement is not a standard LR part but the company marketing the kit has them made up specifically.

Further their supplier is no longer in business. But I understand they are looking to get another supplier.

Thank you to all those who helped and in particular Scouse.

If I do fine they have sourced another suppler I'll post it on the forum