TC/HDC/ABS

[XHPBT1]

Just a question, I had the 3 amego's come on i stop the car turned it off opened the drivers door, then turned the key the car beeped once then it started, 3 amego's GONE, everything went back to normal....

can anyone explain this?

[stig0000]

yer,,, most likly a wheel speed sensor lost voltige for a sec, an when you reset the car,, it got V's back, could hapen agen/ or never agen,, you never no with land rovers,

well explane this, my thermo fan for the a/c hasent worked for about a yr or so, an to day IT WORKED,, WTF, i even tryed fixing it, an still dident work,, an now it works fine;);)

i think i mite have the first land rover to ever fix its self:D now that iv said that il go out there tomoz an it wont work:(:(

[Franz]

Just a question, I had the 3 amego's come on i stop the car turned it off opened the drivers door, then turned the key the car beeped once then it started, 3 amego's GONE, everything went back to normal....

can anyone explain this?
I had this happen as well and was thinking - here we go, back to the dealer to have it fixed - 2 starts later, no problem, three amigos gone and all well again - oh well, at least it was a no cost fix!

First time it's happened in 8 years over 2 separate Disco's.

Cheers,

Franz

[XHPBT1]

lol they seem to be alive....
I have had mine since 01 and once ever the 3 amegos came on because of excess dust in the breaks... the disco has done 220,000 and stilll going strong....

can someone tell me why the car beeped after i turned it off, then opened the door and started it?

are there any secret reset procedures...

[AussieAub]

Just a question, I had the 3 amego's come on i stop the car turned it off opened the drivers door, then turned the key the car beeped once then it started, 3 amego's GONE, everything went back to normal....

can anyone explain this?

Mine does this occasionally.
Though I have noticed that its usually when I park on a slope, and more so in the wet on a slope. Also happens if I go from 'P' to 'D' on the box a bit too quick (auto).

All I do is drive to flat spot, turn off, take the key out, wait 10 secs, restart, hey presto - lights go out!
I was given this "trick" from a Landy mechanic mate I contacted back in the UK who reckons these switches are very temperamental, and an "actual failure" is very rare indeed. He also said he knew of a lot of rouge garages in the UK who are aware of this prob, just do the procedure above, charge a fortune for "repair", then park it on a flat surface ready for collection and hope the lights don't come back on when the customer picks the vehicle up!! :mad:

Have given up worrying about it! If it was a prob I would have thought I'd have issues with them coming on out on the tracks but they don't. Only really when I initially start up on the drive (slope) or very occasionally on a car park in the wet.

Prob doesn't help much, but at least you're not alone!! ;)

Cheers,

..:: KIEREN ::..
2000 Disco II Auto V8
Object Of Mass Consumption

[McDisco]

Yeah this doesnt always work, but I always try ift when the chimes go off. I carry my Nanocom with me everywhere so its not big deal to clear them if they dont go away.

Angus

[disco dan]

Yeah this doesnt always work, but I always try ift when the chimes go off. I carry my Nanocom with me everywhere so its not big deal to clear them if they dont go away.

Angus

angus

what does the nanocom program cost i have the 3 amigos had them reset once but came back on 2 weeks later. i have a laptop and was wondering if i can hook it up to the landie cpu to play with.

cheers dan

[rover-56]

The ABS wheel sensors are sometimes sensitive to vibration from brake squeak, happens even when it is too quiet to hear.
You can get away with turning off and on a couple of times, but eventually one of the sensors will have to be replaced.
You can try cleaning the connectors with contact cleaner, and checking earth points, sometimes that fixes the problem.

Terry

[McDisco]

angus

what does the nanocom program cost i have the 3 amigos had them reset once but came back on 2 weeks later. i have a laptop and was wondering if i can hook it up to the landie cpu to play with.

cheers dan

Hey mate

Will set you back around $450-500 dollars. You can get them from Karcraft or Rovacraft.

Check out the nanocom website - :: Nanocom :: (http://web.nanocom.it/default_i.cfm)

You can run it independently or connect it to the laptop via a serial port or usb. Very handy piece of kit for self diagnosis...thats if you know what you are looking for. You need to understand a bit about how the vehicle works.

I got one mainly cause I was doing a fair bit of remote touring and didnt want to be left stranded without being able to diagnose issues. My brother in law also has a disco so it was handy.

Angus

[disco dan]

Hey mate

Will set you back around $450-500 dollars. You can get them from Karcraft or Rovacraft.

Check out the nanocom website - :: Nanocom :: (http://web.nanocom.it/default_i.cfm)

You can run it independently or connect it to the laptop via a serial port or usb. Very handy piece of kit for self diagnosis...thats if you know what you are looking for. You need to understand a bit about how the vehicle works.

I got one mainly cause I was doing a fair bit of remote touring and didnt want to be left stranded without being able to diagnose issues. My brother in law also has a disco so it was handy.

Angus

hi angus

i spoke with andrew from rovercraft and he said 499 for it but didnt realise it can be only used on a td5 not the V8. so is there another system i could use

cheers dan