PDA

View Full Version : Nanocom Graphics analysis


Timka21213
10th April 2009, 09:05 PM
Hello,

Does anyone try to compare different graphics from Nanocom for the same car but with different tuning (chip, EGR, shnorkel, etc.)?

It would be useful to have a possibility to compare several logs in a same time or figure out dependences, like speed/air pressure or excessions from normal/typical values.

Thanks for any ideas!
Timka21213
15th April 2009, 07:36 PM
Free source code of the Graphic viewer is available there:

:: Download - Nanocom :: (http://web.nanocom.it/download_i.cfm?categoria=110)
Timka21213
26th May 2009, 04:33 PM
We add CSV file export to the Graphic Viewer from Nanocom and extend number of measurements in the graph to the maximum value.
The program file is attached and you can have a look on it - just place it to the Nanocom Program Files folder.

http://www.aulro.com/afvb/attachment.php?attachmentid=15763&stc=1&d=1243323106
LandyAndy
26th May 2009, 08:54 PM
Hi Timka
Thanks for the post.
I had missed the graphic viewer download,but seen others display such.Will look into getting it.
Thanks
Andrew
discv
27th May 2009, 06:34 AM
Guys, in the UK, info on forums about Nanocom is limited to how to switch it on and read fault codes!
Is it possible that some kind sole could post an idiot guide to Graphics?

What does it do- what is it for- how can I use it?

Or is it just for IT experts? Tony
Timka21213
27th May 2009, 08:19 AM
Guys, in the UK, info on forums about Nanocom is limited to how to switch it on and read fault codes!
Is it possible that some kind sole could post an idiot guide to Graphics?

What does it do- what is it for- how can I use it?

Or is it just for IT experts? Tony

Nanocom is far more than just a fault codes eraser! Check this out:

:: FAQ - Nanocom :: (http://web.nanocom.it/faq_i.cfm)

:: Download - Nanocom :: (http://web.nanocom.it/download_i.cfm)

:: Download - Nanocom :: (http://web.nanocom.it/download_i.cfm?categoria=110)

:: Download - Nanocom :: (http://web.nanocom.it/download_i.cfm?categoria=107)


About Graphic viewer: we took the original source codes and add some futures.

This is a simpe utility to view and export Nanocom fueling logs.
Timka21213
27th May 2009, 11:47 PM
2.05 version is available, but the Graphic Viewer at least in English version doesn't work at the moment, so you can use mine.