Hitower
17th April 2009, 08:12 PM
Could any one help me to ID some wires I have found under my newly acquired 2000 Disc TD5 manual that have been torn apart mid-wire?
I'm still to test all the options on the car and the rear airbags have been replaced with coil springs.
1) At the top of the drives front wheel arch there is a fairly thick black wire (the stealer sprayed the underside black so could be a different colour originally) that comes from the engine bay and then runs on top of the chassis rail toward the back. Any idea on what this wire could be?
(Both end of the torn wire are there and could be spliced together, but I would like to check first.)
2) At the rear of the inlet manifold there is a sender unit of sorts with a black wire hanging from it that looks to have been cut. Any ideas on what this unit is and where the wire should go to?
3) Final, on the drivers side of the engine hanging down from a lomb just above the starter motor is torn apart white with black strip wire. Any idea on what the wire is for and where it should go to?
Everyone's assistance is much appreciated as my right hand is currently incapacitated and I would like to know these things prior to going back to the stealer and being fed a line.
Thank heaps
Tony :(:confused:
I'm still to test all the options on the car and the rear airbags have been replaced with coil springs.
1) At the top of the drives front wheel arch there is a fairly thick black wire (the stealer sprayed the underside black so could be a different colour originally) that comes from the engine bay and then runs on top of the chassis rail toward the back. Any idea on what this wire could be?
(Both end of the torn wire are there and could be spliced together, but I would like to check first.)
2) At the rear of the inlet manifold there is a sender unit of sorts with a black wire hanging from it that looks to have been cut. Any ideas on what this unit is and where the wire should go to?
3) Final, on the drivers side of the engine hanging down from a lomb just above the starter motor is torn apart white with black strip wire. Any idea on what the wire is for and where it should go to?
Everyone's assistance is much appreciated as my right hand is currently incapacitated and I would like to know these things prior to going back to the stealer and being fed a line.
Thank heaps
Tony :(:confused: