poly air for the rear of 130?

[scotyp]

Hi all

I have a 96 model 130 with 300ks on the clock and loaded with all my work gear, so theres a bit of weight on it, its leaning down on the front corner so I will put new coils under the front but no doubt it will then look like its sagging at the back,

So my thoughts were to take out the inner coils at the rear and replace with polyair bags,

Would this be ok you reckon or better off replacing all coils,
Has anyone been down this path
thanks in advance

Scotty

[Gaz69]

scotyp wrote

Hi all

I have a 96 model 130 with 300ks on the clock and loaded with all my work gear, so theres a bit of weight on it, its leaning down on the front corner so I will put new coils under the front but no doubt it will then look like its sagging at the back,

So my thoughts were to take out the inner coils at the rear and replace with polyair bags,

Would this be ok you reckon or better off replacing all coils,
Has anyone been down this path
thanks in advance

Scotty
Whatever you do not use the type that go in your inner coil on the rear of the 130, Bloody useless. I probally would do as you suggest and rip the inners out and try polyairs with your original coils.

Cheers Gaz

[350RRC]

Have a look around this site. Half the price and there will be airbags suitable for a 130 somewhere here.

4121 Firestone Coil-Rite Rear Air Spring Kit for Coil Spring Suspensions (http://www.truckspring.com/firestone-coil-rite-kit-rear-4121.html)

cheers, DL