Soft Dash Clock

[WedWon]

Hey all

I am wanting to put a Soft Dash analogue clock into my Disco
Does anybody know what tab does what on the rear of the clock?

Disco has four wires:
1. light
2. permenant power
3. aux power
4. earth

I'm guessing the RRC clock just runs on the permanent power, but which tab it connects to is not to clear

Any help appreciated

Cheers
Jason

[PLR]

G`day Jason

Has 3 PN , RN and B

RN and B are same as disco .

PN is the power on classic , doesn`t use LG .

Disco uses 20amp on PN Rangie use 10amp on PN .

Cheers

[WedWon]

G`day Jason

Has 3 PN , RN and B

RN and B are same as disco .

PN is the power on classic , doesn`t use LG .

Disco uses 20amp on PN Rangie use 10amp on PN .

Cheers

Thanks PLR

Went in without a hitch in the end (even ran dash lighting down to spotlight switches I installed below the clock)
Only had to get the power earth the right way round on the tabs (the power goes to the cross bar of the "T" shape the two connectors make....in case anybody else is interested)

An analogue clock looks just that little bit classier in my opinion

Cheers
Jason

[BigJon]

G'day Jason,

Pics?? :)