d1 steering guard

[dirtdawg]

well after bending the original one a while ago i though today i would fix it up as i had some steel lying around


thanks to a stump i didnt see it looks like this

https://www.aulro.com/afvb/images/imported/2009/06/696.jpg

had some gal pipe lying around
https://www.aulro.com/afvb/images/imported/2009/06/697.jpg

and some angle on the back for strength

https://www.aulro.com/afvb/images/imported/2009/06/680.jpg


all i want to do now is run some checkerplate from the steering guard to the bottom of the bull bar

[Cap]

Unfortunately for me I bent the crap out of the legs too, so I will fabricate something from scratch. I will be using rhs instead of pipe, the RHS will be at the same angle as the legs bolted to the front... this way I can screw in a checkerplate. Also the front legs will be angle line, again for the reason I can use this for the checkerplate.

[dirtdawg]

everything i used i had lying around the house