View Full Version : Diff ratio's
Sith
24th June 2009, 06:20 PM
Hey all , 
 
My fender is running currently a 285x75x16 Cooper ST 
 
Going by tire size charts the 285 is a 32 inch and the 255 is a 33 ... the orig rubber wear is a 235 which is a 31 inch ...
abait i find that these tires are crapola ... I would love the 255x85x16's so I will be getting some at a later date ... when these round black pieces of poo wear out ...they are 80% 
 
So I want to concerntrate on getting the diff ratio's spot on .
Can you guys please point me in the right direction for quality , price , and where to get sorted !
 
thanx in advance
long stroke
24th June 2009, 06:28 PM
Hey all , 
 
My fender is running currently a 285x75x16 Cooper ST 
 
Going by tire size charts the 285 is a 32 inch and the 255 is a 33 ... the orig rubber wear is a 235 which is a 31 inch ...
abait i find that these tires are crapola ... I would love the 255x85x16's so I will be getting some at a later date ... when these round black pieces of poo wear out ...they are 80% 
 
So I want to concerntrate on getting the diff ratio's spot on .
Can you guys please point me in the right direction for quality , price , and where to get sorted !
 
thanx in advance
285/75/16's are closer to 33"s, around about 32.8-32.9 inches and 255s are a propper 33 (maybe a tad over;))
I wouldn't worry about diff ratio's on a defender with only 33's;)
They come standard with roughly 32's, so you are only increasing your tyre size by 1'':)
Different storry for a disco or rangie because they come standard with roughly 29's:angel:
CHEERS TIM.
Sith
24th June 2009, 06:49 PM
Specification  Sidewall  Radius  Diameter  Circumference  Revs/Mile  Difference285/75-16         8.4in  16.4in    32.8in        103.1in        614        0.0%255/85-16         8.5in  16.5in    33.1in        103.9in        610        0.7%Specification  Sidewall  Radius  Diameter  Circumference  Revs/Mile  Difference235/85-16         7.9in  15.9in    31.7in         99.7in        636        0.0%255/85-16         8.5in  16.5in    33.1in        103.9in        610        4.2% is what I was looking at ....
lambrover
24th June 2009, 08:52 PM
mate I am running 33's on my county and they are fine, the 255's are 33.3'' and you will be ok to run them, my speedo is still reading faster than actual speed I checked it against a gps so it's corrected it's self by about 4klms as with the standard tyres it was further out than that.
isuzurover
25th June 2009, 01:07 AM
Specification  Sidewall  Radius  Diameter  Circumference  Revs/Mile  Difference285/75-16         8.4in  16.4in    32.8in        103.1in        614        0.0%255/85-16         8.5in  16.5in    33.1in        103.9in        610        0.7%Specification  Sidewall  Radius  Diameter  Circumference  Revs/Mile  Difference235/85-16         7.9in  15.9in    31.7in         99.7in        636        0.0%255/85-16         8.5in  16.5in    33.1in        103.9in        610        4.2% is what I was looking at ....
As your post shows:
235s ~ 32"
285s ~ 33"
255s ~ 33"
My 285s measured about 33.1" when new.  My 255s about 33.3"
No change in gearing needed. You should also find that your speedo is spot on with that size tyre.
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.