PDA

View Full Version : 16mm locknuts


rmp
18th July 2009, 07:49 PM
Anyone know where I can get some 16mm locknuts, the auto accessory stores like Repco only go up to 12mm.

tia
V8Ian
18th July 2009, 07:56 PM
Boltmasters or any industrial supplies shop.
Bigbjorn
18th July 2009, 08:38 PM
Bruce Gardner in Melbourne, one of the M suburbs, Mordialloc or Moorabbin. 0408 056 255, business name is B.S.F. Bolts. That is not all he does. Has a full range of BA taps and dies also.
p38arover
18th July 2009, 09:03 PM
Anyone know where I can get some 16mm locknuts, the auto accessory stores like Repco only go up to 12mm.

tia

What kind of locknuts? Nyloc or the ones with a triangular-like section at the top (like P38A exhaust pipe nuts)?
alien
18th July 2009, 09:13 PM
Check the larger industrial parks.
Most have a eng./bolt/bearing supply shop.
Also try truck part/acc. shops, most carry a small range of bolts/nut (some open Sundays:BigThumb:).

Cheers.
rmp
18th July 2009, 10:44 PM
What kind of locknuts? Nyloc or the ones with a triangular-like section at the top (like P38A exhaust pipe nuts)?

Good point, should have been more specific. Nuts to discourage people from walking off with my spare wheel, not the Nyloc type.
p38arover
18th July 2009, 11:02 PM
Ahh, You need to steal them from a Disco 1.

Try Bundalene - he may have some D1 wheel lock nuts. I assume you want five (and the tool) to suit the car as well as the spare.
Tank
19th July 2009, 07:22 PM
Anyone know where I can get some 16mm locknuts, the auto accessory stores like Repco only go up to 12mm.

tia
I just bought a set of 5 wheel nuts ($7.00 ea. for alloy wheels, not locknuts) from Tyre Power Tyres (Moruya) so a Tyre Power store near you might be able to help. Repco could also get these wheel nuts but @ $23.00 ea, I said no thanks, Regards Frank.
njz
20th July 2009, 12:04 PM
Barrinut do a range of locking nuts.

Barrinut Lock Systems (http://www.barrinut.com.au/)
rmp
20th July 2009, 09:50 PM
Barrinut do a range of locking nuts.

Barrinut Lock Systems (http://www.barrinut.com.au/)

Not any more they don't, not enough volume so they've stopped.

Repco can't help either, neither can Autobahn, nor Tyrepower.

Is there nobody that does 16mm locknuts?????
V8Ian
21st July 2009, 12:59 AM
Not any more they don't, not enough volume so they've stopped.

Repco can't help either, neither can Autobahn, nor Tyrepower.

Is there nobody that does 16mm locknuts?????
Lockwood, but they're not hex:o;)
rmp
21st July 2009, 09:31 AM
Bruce Gardner in Melbourne, one of the M suburbs, Mordialloc or Moorabbin. 0408 056 255, business name is B.S.F. Bolts. That is not all he does. Has a full range of BA taps and dies also.

Thanks, but he does imperial only.