Nano wont talk to ECU

[Zute]

Now Ive got the 2.05v I'm trying to do a power bleed. But it says it cant initiate communication with Abs ECU. But it does work with the engine ECU. Ive checked the unlock codes and they all seem OK. also runs fine in Instrument mode. Ive tryed it with motor running and just at p2. Any thoughts anyone ?

[LandyAndy]

Hi Peter
Whilst trying to get my Nanocom sorted I did come across somewhere on Nanocoms website explaining how to get the ecu/nanocom to talk to one another in different applications.I have tried to get into my ACE system to fault check.It involved turning the ignition key off waiting and turning on again.It displayed a prompt on the laptop do do so,ie you may need to have the laptop in the vehicle.
Goodluck
Andrew

[Zute]

Yep, the turning on and off thing seems to work. I think it just needs you to suffer a bit first:(
Anyway, got the brakes working(cleared 3 amigos)after running power bleed and test procedure.
They still suffer the squeaky brake syndrome but Ill put up with that till the pad wear some more.
With the new soft ware, I don't get the fault reading in the rear left wheel speed sensor. It also connects to the PC better.
Thanks again for your help Andrew, now I can move on to other improvements.