PDA

View Full Version : swapping side mirrors



PaulP38a
4th August 2009, 12:00 AM
My '99 4.0 "pov pack" had a broken passenger side mirror from kissing a tree.

So I got a replacement mirror from a reputable supplier and it turned out to be from a HSE. So what you say? The 4.0 "pov pack" doesn't have memory seats/mirrors like the HSE and the connectors are different.

Being the inquisitive type, I compared the wiring diagrams for the two types of mirrors on RAVE and decided that the potentiomenter wires were surplus to my needs and proceeded to swap over the connectors.

Half good results ensued - I have control to left and up, but nothing to right and down. I can hear a switching sound in the mirror though.

Your suggestions appreciated.

Cheers, Paul.

andrew e
4th August 2009, 09:32 AM
I hope some dill didnt send you a dud mirror. Check the up and down motor pins with 12v to be sure.

Andy

PaulP38a
6th August 2009, 10:30 PM
I hope some dill didnt send you a dud mirror. Check the up and down motor pins with 12v to be sure.

Nope, it was the dill who wired up the mirror the wrong way around :eek:

If anyone is interested, the correct wiring is:
red = right
yellow = left
grey = up
blue = down
black = ground to outstation
green = +12V from outstation

works like it should now :)