PDA

View Full Version : Any Ideas



maggsie
7th September 2009, 07:10 PM
It was just coincidence that after wiring the power supply to my CB radio I couldn't start my Disco. I went to move the car and as soon as I turned the key in the ignition the car appeared to fire but didn't start and the hazard lights started flashing. Removed the key and the hazard lights remained flashing. I rang Barbagallos and was told to check the inertia switch, I pressed it but it made no difference. In the end I removed the negative battery lead and everything was back to normal after I refitted the lead. As far as the CB is concerned, it is powered directly from the battery through a 5amp fuse, therefore has no influence on the electrics. One positive from ringing Barbagallos was obtaining my radio and EKA security codes. Anyone have any ideas or had a similar problem.

Regards
Maggsie

04 V8 Disco
'85 V8 County

Ean Austral
8th September 2009, 02:22 AM
Sorry cant help, but you must be the only person to ever get something out of barbagellos for free... They would have to top my list of the worst L/R people to deal with in Australia.
I made the mistake of buying my first Disco from them...
Cheers Ean

Urban Panzer
9th September 2009, 10:12 AM
Sounds like the car was in "passive" immobilization to me.

Did you try to shut all the doors then lock / unlock with remote and then try to start ?

maggsie
9th September 2009, 11:34 AM
Yes, did all that. Just another Landrover mystery!

Regards
Maggsie
04V8 Disco
'85 V8 County