PDA

View Full Version : Rear Seat Belt Issue



Narangga
10th September 2009, 06:49 PM
I have an issue with the RHR seat belt (5 seats so it is the one directly behind the driver).

Belt is difficult to extend and then almost never retracts. Here it is insitu:

http://img171.imageshack.us/img171/8653/rhrearcover.th.jpg (http://img171.imageshack.us/i/rhrearcover.jpg/)

and with the cover removed. The black section in the middle that the belt has to turn 90 degrees and travel around is some sort of polystyrene:

http://img15.imageshack.us/img15/3981/rhrearbelt.th.jpg (http://img15.imageshack.us/i/rhrearbelt.jpg/)

However on the LHS there is no problem:

http://img32.imageshack.us/img32/997/lhrearcover.th.jpg (http://img32.imageshack.us/i/lhrearcover.jpg/)

as there is no foam!

http://img9.imageshack.us/img9/469/lhrearbelt.th.jpg (http://img9.imageshack.us/i/lhrearbelt.jpg/)

Comments/suggestions please.

alien
10th September 2009, 07:02 PM
Have you tried to pull that foam out Dale?

It looks to me like it's not suposed to be there.


Cheers Kyle.

Narangga
10th September 2009, 07:15 PM
Have you tried to pull that foam out Dale?

It looks to me like it's not suposed to be there.


Cheers Kyle.

Not pull it out as it is far bigger than the hole you can see in through! I was after some insight from others before my next step which is to remove the rest of the trim and see if I can get it out.

Having said that it seems to be fixed in there.

gazk
10th September 2009, 07:27 PM
I found a piece of foam just like that in my 02 model. It was located on the drivers side behind the trim between the storage bin and the tail light panel. (behind the plastic vent ) I thought the previous owner may have put it in for padding when he stored something in there, I threw it away. There was no such foam material near the seat belt mount.
regards
Gary

Narangga
10th September 2009, 07:49 PM
None back there on mine - just the bit fouling the seat belt!

alien
10th September 2009, 09:26 PM
I'm thinking it might have been put there as an anti rattle device;).
Can't see it being there from new.
Keep us informed when you pull it out.

Cheers.

Narangga
10th September 2009, 09:33 PM
Saturday would be the day I think!

alien
10th September 2009, 09:36 PM
Saturday would be the day I think!

I'll check mine for you then also, can't do much else with it :(.

Cheers.

Narangga
10th September 2009, 09:44 PM
Have I missed something? How come?

alien
10th September 2009, 10:10 PM
Started here...

http://www.aulro.com/afvb/discovery-2/82702-wombat-hole-vs-td5-auto.html?highlight=chain

Then got some good advice here...

http://www.aulro.com/afvb/technical-chatter/83678-possible-td5-oil-chain-stoped-cam-chain.html?highlight=chain

And with some other searching I've now got the head,timing case and sump off.
Head all checked and in my shed but no parts:(
Still waiting as coming from England.

Cheers (I need another beer) Kyle.

Narangga
10th September 2009, 10:14 PM
Ouch! I did see them but didn't recognise that it was yours.