Setting boost pressure using Nanocom with B.A.S boost box is fitted.????

[Benny_IIA]

I have put a B.A.S boost box on my TD5, I'm in the process of setting the boost, using my Nanocom but because the "Box" tricks ecu into thinking its running less or something like that:confused:.

Will the Nanocom give me correct Bar or will I have to use a manual boost gauge.

Thanks Ben.

[Blknight.aus]

nope, it'll read what the B.A.S unit wants it to read regardless of whats actually going on in the engine. If you want to monitor it you need an old school gauge.

[Benny_IIA]

nope, it'll read what the B.A.S unit wants it to read regardless of whats actually going on in the engine. If you want to monitor it you need an old school gauge.


Thanks Dave, I was doing my head, until i remember how it worked:angel:.

I have a manual gauge just have to get around to fitting, going to look like a Rice Burner.....

Lanmo (nismo)........:D

[B-A-S]

I hope you have worked out what is needed now,
Here is a link to a pdf that may help.

http://www.bellautoservices.co.uk/pdf/td5booster.pdf

Page 9 explaines.


Thank you to Blknight.aus for comfirming you will need to use the old school method of measurement and not your nanocom.

Pete

[Benny_IIA]

I hope you have worked out what is needed now,
Here is a link to a pdf that may help.

http://www.bellautoservices.co.uk/pdf/td5booster.pdf

Page 9 explaines.


Thank you to Blknight.aus for comfirming you will need to use the old school method of measurement and not your nanocom.

Pete

Yer I worked it out, fitted guage last night the little black box works a treat.

Althought still a little smokey at 25psi:twisted:. But who cares :D


Ben