Auto Flashable ECU to Manual

[Hitower]

Hi all,

Considering acquiring a flashable ECU for my 2000 Disco TD5. Is it possible to change an auto flashable ecu to a manual flashable ecu as I have notice when using my Nanocom this area on my non-flashable ecu doesn't seen to be accessible for changes?

Thanks in advance for the information.

Tony Appleton

[Redback]

Hi all,

Considering acquiring a flashable ECU for my 2000 Disco TD5. Is it possible to change an auto flashable ecu to a manual flashable ecu as I have notice when using my Nanocom this area on my non-flashable ecu doesn't seen to be accessible for changes?

Thanks in advance for the information.

Tony Appleton

We have done this, the part No you need for a flashable ECU to suit a manual TD5 Disco is NNN500020.

Baz

[trebor110]

From my past research the auto ECU is a different part No: but can be re programmed to suit the manual. However the manual ECU cannot be reprogrammed to suit the auto unless it had been fitted with an auto compatible ECU.

Rob

[Tombie]

I have a flashable Manual ECU available... $650 if you send me your old Non-Flash ECU.

[Hitower]

Thanks Tombie.

I currently have a TRS chipped non-frashable in the car. I was essentially just postulating the prospect of a flashable ECU which I think would have been a better option 6 months ago.:(

I had spotted an auto on ebay here in Brisbane but it was for an auto, but I thought if it went cheap then all the better.

Thanks again Tombie