View Full Version : Aircon speeds - no change?
thrower78
14th December 2009, 06:33 PM
Hi All,
In my 97 series 1 disco. My aircon works fine but I have speed 1 (very slow) and speed 4 (flat out). Speeds 2 and 3 are the same as 1?
Has anyone else had this problem, Is it some plastic behind the switch broken, or something else?
Thanks Andrew
roverv8
14th December 2009, 07:04 PM
Hi All,
In my 97 series 1 disco. My aircon works fine but I have speed 1 (very slow) and speed 4 (flat out). Speeds 2 and 3 are the same as 1?
Has anyone else had this problem, Is it some plastic behind the switch broken, or something else?
Thanks Andrew
What happens when you turn off the aircon at the button,
does the fan only work on 4?
If so it's most likely to be the resistor,
thrower78
14th December 2009, 09:25 PM
Don't know will try with fan only tomorrow and get back to you.
thrower78
17th December 2009, 11:43 AM
Yep same result with air con turned off and just fan. I am pretty sure after reading many post on this site that it will be the resistor pack. Where do you get a new pack from, or could I just got to jaycar or somewhere similar buy the appropriate resistors and solder them on? Has anyone had a go at the later or do people just buy a new pack
Andrew
roverv8
18th December 2009, 07:49 AM
Yep same result with air con turned off and just fan. I am pretty sure after reading many post on this site that it will be the resistor pack. Where do you get a new pack from, or could I just got to jaycar or somewhere similar buy the appropriate resistors and solder them on? Has anyone had a go at the later or do people just buy a new pack
Andrew
I think you may have to get a replacement from someone who specifically stocks Land Rover parts/bits, although an auto spare parts place maybe able to match it up
If someone else has an aftermarket source, speak up now please!
Disco44
18th December 2009, 10:05 AM
I think you may have to get a replacement from someone who specifically stocks Land Rover parts/bits, although an auto spare parts place maybe able to match it up
If someone else has an aftermarket source, speak up now please!
On my 96 Disco , the handbook says that the aircon does not work on 1 only the fan.Is that different on the 97?
John
thrower78
18th December 2009, 10:27 AM
Put the resister pack out of my car into dads disco and his air con works fine stuffed around with the switch and figured out that it is the switch that is faulty. So I need to get another switch dash panel, anyone got any second hand ones?
roverv8
18th December 2009, 11:34 AM
Put the resister pack out of my car into dads disco and his air con works fine stuffed around with the switch and figured out that it is the switch that is faulty. So I need to get another switch dash panel, anyone got any second hand ones?
Good you worked it out,
It had to be one or the other!!
nice1guv
18th December 2009, 02:59 PM
On my 96 Disco , the handbook says that the aircon does not work on 1 only the fan.Is that different on the 97?
John
I've never read that in the handbook. :huh:
My previous 96 aircon worked on speed 1 no problems, and so does my current 98 as well.
roverv8
18th December 2009, 03:41 PM
I've never read that in the handbook. :huh:
My previous 96 aircon worked on speed 1 no problems, and so does my current 98 as well.
+2
Aircon also works on 1, on my 94 & 96 models
Powered by vBulletin® Version 4.2.4 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.