Front anti roll bar fiitng on to a defender 110

[kewlmeru]

Hi i own a land rover defender 110 1994 in which i would like to fit the front anti roll bar but the chasis has got no bracket for it.
Kindly can i get pics and instructions on what size bracket to make and where to weld it

[Blknight.aus]

have a look at the ones on the rear bar, dupliacte them and weld them up to the chassis.

from memory the bar goes behind the front axle and over the propshaft with a special bend in it.

the mounts for the axle are as per the rear axle.

Id question why your going to goto the effort of fitting it when a slightly stiffer set of front springs will offer up pretty much the same advantages.

[rick130]

Dave, it actually goes under the front prop shaft, or they ddid up to the late nineties.
If you have long travel shocks with increased droop, the drive shaft will hit the ARB at full droop.

[dmdigital]

They still do (go under the front prop shaft) even on the Puma. It's a Defender and not a lot changes.

[Blknight.aus]

been a while Since Ive seen one in, most people are asking me to pull them out.

Next time I'll bring the RAVE and parts manuals with me on holidays.... (the cd sleeve with them and my country MP3CD's are all in the back of the passangers seat of the new rover)