RRC Universal Joint Sizes

[Dougal]

Does anyone have the sizes and/or part numbers for the universal joints used in classic rangie driveshafts?

I have the larger of the two sizes and need to confirm or deny if part number QL403 is the one I need.

Searches here pull up heaps of D2 driveshaft Q&A but I couldn't find anything for the classics.

[discowhite]

ive posted sizes and hardy spicer part numbers here before, search for k5 13XR. i think they are the ones you are after, you can check the sizes on the hardy spicer site.
the k5 13XR is a 1300 series joint and is the most common size in LR land.

cheers phil

[Dougal]

ive posted sizes and hardy spicer part numbers here before, search for k5 13XR. i think they are the ones you are after, you can check the sizes on the hardy spicer site.
the k5 13XR is a 1300 series joint and is the most common size in LR land.

cheers phil

Excellent Phil, with that number I found this, it has all the dimensions:
http://www.hardyspicer.com.au/PDF_Files/Driveline/Universals%20&%20Centre%20Bearings.pdf

The K5-13XR is listed for early rangerover (mine is on the changeover) and measures 26.99x81.76mm, it is 1310 series.
The K5-A757 is listed for later classic rangerover and measures 26.99x74.61mm, it is 1300 series.

[rovercare]

Was just about to mention there is 2 sizes, nothing like being caught out:mad:

[rovercare]

Just had a poke around to see what I had stashed

https://www.aulro.com/afvb/images/imported/2009/12/297.jpg

Which is the same as K5-A757, looking at the listings