PDA

View Full Version : Alpine Window - rust repairs with pics



Cap
3rd January 2010, 07:02 AM
I posted a thread sometime ago about Alpine window fixing (http://www.aulro.com/afvb/discovery-1/90149-alpine-window-rust-how-fix.html). Now my bro had to do his one (only right side) and took some photos for me so I can put them up here (and so I can pull my finger out and do mine as well - although hopefully not as bad nick as this!! :eek:).

The pics are self explanatory, but he said that the best thing to do which he didnt until after the pics was to remove the inside plastic cover to allow better access to the inside of the roof panel.

Time taken:

Remove the alpine window - about 3min
Remove internal plastic cover - 10 min
He used zinc plated sheet that he bent by hand using a vice and a length of angle to get the right shape. Time taken here depends on work required. He is a welder by trade so he welded the sheet on. He will take it to a pannel shop to do the finishing off and re-paint the roof.
Replace the alpine window - 10 min


On the topic, does anyone know a good pannel beaters/painters that my bro can talk to about the roof (he is in east Melb)

https://www.aulro.com/afvb/images/imported/2010/01/1404.jpg

https://www.aulro.com/afvb/images/imported/2010/01/1405.jpg

https://www.aulro.com/afvb/images/imported/2010/01/1406.jpg

https://www.aulro.com/afvb/images/imported/2010/01/1407.jpg

https://www.aulro.com/afvb/images/imported/2010/01/1408.jpg

https://www.aulro.com/afvb/images/imported/2010/01/1409.jpg

https://www.aulro.com/afvb/images/imported/2010/01/1410.jpg

Cap
3rd January 2010, 02:43 PM
I just had a look at mine, and yup, both sides have rust, but not to the point of welding a new piece. So my advice to you is, if you have ANY signs, such as bubling paint, rust stain or anything, DO THE REPAIRS NOW! Else they will end up being as bad as the pics above!

All I did was sand back, use a kill rust product (all three stages im using), then ill place back the rubber seal but with windscreen silicon in the grooves.

klmatthews
30th December 2013, 10:16 AM
about to fix my rust this week will let you know how i got on