PDA

View Full Version : Seat runners



PBob
20th January 2010, 06:47 PM
Re these runners, are they being fitted to Pumas, or is everyone talking TDI and TD5?:confused:

camel_landy
21st January 2010, 08:16 AM
Which seat runners? Are you talking about the 'Mud Rails' (the ones which raise the runners so they run over the bulkhead lip)?

If so, yes, you can fit them to the Pumas. Mind you, I'm not sure how effective they are in the single cabs...

Also, you can save yourself a few $$$ of you use a couple of lengths of 20mm box-section instead. ;)

M

PBob
21st January 2010, 09:54 AM
Thanks Camel Landy,
Yep thems the ones - just looking at a 110 crew cab and that was the idea.

SVX37
21st January 2010, 10:12 AM
Re these runners, are they being fitted to Pumas, or is everyone talking TDI and TD5?:confused:


I have them fitted to my PUMA. They are one of the best accessories I have fitted! I can recommend them! Contact Daniel from Explore OZ who advertises on here and is extremely helpful.

Exploz Pty. Ltd.
Vehicle conversions & equipment
41 Carr Street, Waverton NSW 2060
62 Grove Avenue, Penshurst NSW 2222
P 0438 183 507 | www.exploz.com.au (http://www.exploz.com.au/)


* I gain nothing from this!

mike_ie
21st January 2010, 10:35 AM
Photos of them fitted to the Puma can be seen here:
MUDSTUFF.CO.UK, MUD Seat Rails, Land Rover Defender Solutions: West Yorkshire (http://www.mudstuff.co.uk/MUD_Seat_Rails.shtml)

But, as camel_landy said, they're just sections of box with a lip cut out at the back, so if you want to save yourself quite a bit of cash, take a trip down to the local steel suppliers.

PBob
21st January 2010, 09:30 PM
SVX37 and Mike_ie,
Many thanks, questions answered!!:cool: