Page 2 of 5 FirstFirst 1234 ... LastLast
Results 11 to 20 of 46

Thread: I'm on Tapatalk....is this really the first Asian vehicle thread...?

  1. #11
    DiscoMick Guest
    My BIL has an earlier model, which was good, but make sure you change down if towing or the highest gear can wear out. Don't lug it in too high a gear.

  2. #12
    Join Date
    Oct 2007
    Location
    Brisbane West
    Posts
    7,274
    Total Downloaded
    0
    Thanks Mick. I went to a 6 speed auto with this vehicle. Still overdrive but the Aisin auto is very strong. Their manual boxes on the other hand...

    Cheers

  3. #13
    DiscoMick Guest
    That's good, but I would still change down manually when towing. They are set for economy, not long life.

  4. #14
    Join Date
    Oct 2007
    Location
    Brisbane West
    Posts
    7,274
    Total Downloaded
    0
    Yep mate I agree with that. I wouldn't tow anything heavy in top in any modern TD.

    Cheers

  5. #15
    Join Date
    Oct 2007
    Location
    Brisbane West
    Posts
    7,274
    Total Downloaded
    0
    Ok while we are not meant to go anywhere non essential I decided to take 5 and drop down under the Triton for some photos.

    First thing to note is that unlike C section MN and early MQ rear chassis the MR (like the MQ mark II) has a full box chassis (2 welded C) and gusseting at the notionally weak point nner the rear axle. The rails are larger than D2 except at the rear where they are smaller. I habnt yet put calipers over the wall but will do. The wall thickness was increased in recent models and it looks as thick as D2.

    Diff and rear axles are huge.

    Everything is tucked up nicely.

    The body mounts are a little work of art oddly enough.

    The rear drums are big items as are the revised front discs (revised for MR).

    There is a decent thick steel beam behind the rear plastic bar.

    The rear diff has an E-Locker as the photos show.

    The universal joints and prop shafts are large items - much bigger than D2.

    The whole underside is well built. Impressive.

    Cheers

  6. #16
    Join Date
    Dec 2007
    Location
    Brisbane West
    Posts
    27,824
    Total Downloaded
    0
    Thanks Andrew, an honest and unbiased report. I'd expect nothing less from you.
    If you don't like trucks, stop buying stuff.
    http://www.aulro.com/afvb/signaturepics/sigpic20865_1.gif

  7. #17
    Join Date
    Oct 2007
    Location
    Brisbane West
    Posts
    7,274
    Total Downloaded
    0
    I started the D2 and will take it for a spin today...very excited. Real soft.spot for the D2.

    Cheers

  8. #18
    Join Date
    Oct 2007
    Location
    Brisbane West
    Posts
    7,274
    Total Downloaded
    0
    Repurposing dual battery system including tray and Red Arc BCDC1225 from D2. Just had to weld on a side plate to brace the tray. Early days but should come together nicely.

    Cheers

  9. #19
    Join Date
    Oct 2007
    Location
    Brisbane West
    Posts
    7,274
    Total Downloaded
    0
    DC2DC In. It will be between battery box and liner as will the maxi fused looms. Will look tidy and be accessible. Cheers

  10. #20
    Join Date
    Oct 2007
    Location
    Brisbane West
    Posts
    7,274
    Total Downloaded
    0
    Done. Outlets both sides.

    Cheers

Page 2 of 5 FirstFirst 1234 ... LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!