• Section Widget

  • Categories Widget (Show All)

  • Recent Articles

  • Rocket00

    There is no available content written by Rocket00

  • Recent Article Comments Widget

  • Recent Blog Posts

  • Recent Forum Posts

    scarry

    HyChill in 2.7 or 3.0

    Low side pressure of 350PSI means something is drastically wrong.

    If you can con the AC guy to give it a good vac and put in the exact

    scarry 8th March 2026, 10:28 AM Go to last post
    Graeme

    A/C now working properly

    The a/c is finally working properly, with evap temp hovering between -0.5 and 0 deg on temp setting Lo, fan on max and engine up to 3000 rpm and the pressure

    Graeme 8th March 2026, 10:14 AM Go to last post
    Arapiles

    What happened to your D3/D4 today?

    Is mortar actually removable after it's set? A couple of years ago some idiot contractors went down our street very early in the morning spraying concrete

    Arapiles 8th March 2026, 09:14 AM Go to last post
    Graeme

    HyChill in 2.7 or 3.0

    Evaporator discharge was high. The low side was high suggesting no path through the condensor then dryer to the compressor.
    Yes, using R134A would

    Graeme 8th March 2026, 09:08 AM Go to last post
    sharmy

    Grumpy old buggers thread

    Most of Queenslands' crude production is used to make diesel at the Ampol refinery in Brisbane and the small one at Eromanga, so we should be ok

    sharmy 8th March 2026, 09:02 AM Go to last post
Search AULRO.com ONLY!
 Search All the Web!