Page 3 of 3 FirstFirst 123
Results 21 to 28 of 28

Thread: Fridge bags. Worth it?

  1. #21
    Join Date
    Nov 2009
    Location
    Melbourne
    Posts
    245
    Total Downloaded
    0
    I have always used a fridge bag - both for protection and to hopefully improve performance. Without having the facility for accurate testing I can't say if it helps performance or not.
    On my latest Waeco, the fridge bag has a silver lining and a dark grey outer fabric. That seemed stupid to me, so I simply turned the bag inside out. As the fridge has symmetrical vents, it works well. I figure it was better to reflect the radiant heat away from the fridge than to try to reflect the "coolth" back at the fridge...



    Cheers
    Numb Thumbs

  2. #22
    Join Date
    Jan 2017
    Location
    Geraldton WA
    Posts
    8,284
    Total Downloaded
    0
    If you are going to keep your fridge in the back of a wagon where it is protected i wouldn't bother with the bag But if you intend to put it on the back of a ute or have it outside at your camp a bag is a Great idea to keep the heat from the sun or the hot wind off the fridge.
    You only get one shot at life, Aim well

    2004 D2 "S" V8 auto, with a few Mods gone
    2007 79 Series Landcruiser V8 Ute, With a few Mods.
    4.6m Quintrex boat
    20' Jayco Expanda caravan gone

  3. #23
    Join Date
    Feb 2005
    Location
    Bracken Ridge - Brisbane - QLD
    Posts
    14,276
    Total Downloaded
    0
    One with, two without.......

    The only way to actually know is to collect data, problem is have the same conditions for both tests would be tough.

    Bag will keep your fridge looking new.....

    Any fridge in a lock up car is going to chew battery regardless of bag or no bag

    Bag lid can be a pain zipping and unzipping depending on install....in the work cars we just leave the lid unzipped, bag is only there to protect the fridge.



  4. #24
    Join Date
    Nov 2011
    Location
    adelaide
    Posts
    2
    Total Downloaded
    0
    Hi. I believe and am no expert in this matter but fridges like the Norcoast one Trailblaza it's not recommended to fit a cover as the condenser coil sits hard against the aluminium outer skin, this is how it dissipates heat without using a fan running over a condensing coil. When that fridge is running feel the outside cover. It will be quite warm. Fitting a cover on this type of cooling will have a negative effect. If a fridge cannot cool the refrigerant sufficiently the head pressure will rise greatly and the fridge will draw more amps and run for longer. When positioning a fridge in your 4wd make sure it has sufficient access to enough airflow through the condenser fan. If you have an Engel in the back of a Ute then a fridge cover is essential.

  5. #25
    Join Date
    Jan 1970
    Location
    Wheelers Hill, Melbourne
    Posts
    4,086
    Total Downloaded
    0
    Fairly complete comparison here which says that bags can protect against sun & scratches etc but also says they can trap heat just as effectively,.

    Best 12 Volt Portable Fridge Comparison Test

  6. #26
    Join Date
    Jan 1970
    Location
    Ellendale Tasmania.
    Posts
    12,935
    Total Downloaded
    0
    Quote Originally Posted by Disco-tastic View Post
    Thanks everyone for your input.




    I'm assuming you never took the fridge oit of the car/camper in order for mold to build up?

    I'm mainly interested in lowering the amp draw to make it last as long as possible, as I only have the single 55Ah secondary battery

    The covers are $60. The fridge will sit in the rear of the D3 and may get a bit of sun on it during the day.
    The Fridge has been running off a 55AH battery for as long as we have had it, nearly 14yrs, 12 of that without a bag, never had an issue when camped running off out Optima 55ah, usually it will run the fridge for around 3 days without charging the battery, pretty much the same when we had it with the bag on. and yes the fridge comes out of the car after each trip and runs at home as a beer fridge on 240v.

    Up until 12mths ago we have only ever had the fridge running off of a 55ah battery, the fridge virtually runs 24/7 and has done for 14yrs.
    Cheers Baz.

    2011 Discovery 4 SE 2.7L
    1990 Perentie FFR EX Aust Army
    1967 Series IIa 109 (Farm Truck)
    2007 BMW R1200GS
    1979 BMW R80/7
    1983 BMW R100TIC Ex ACT Police
    1994 Yamaha XT225 Serow

  7. #27
    Join Date
    Jun 2010
    Location
    Central Coast NSW
    Posts
    1,888
    Total Downloaded
    0
    3 days is pretty good. What sort of fridge?

    I managed about 40hrs off the optima in 36°+ temperatures with the fridge set at 1°. Its one of the newer kings fridges which is a rebadged nova look or waeco. The lid is a bit thin and I think has a hard time keeping the cool in.
    FINN - '72 88" S3 - 2.286 petrol - yet to go on it's first adventure
    SOLD - '08 D3 4.0 V6 - 265/65/R17 on X5 rims
    GONE '96 D1 300Tdi - 2" lift, 32" tyres, HD rear axles, lockers :(

  8. #28
    DiscoMick Guest
    Quote Originally Posted by Numb Thumbs View Post
    I have always used a fridge bag - both for protection and to hopefully improve performance. Without having the facility for accurate testing I can't say if it helps performance or not.
    On my latest Waeco, the fridge bag has a silver lining and a dark grey outer fabric. That seemed stupid to me, so I simply turned the bag inside out. As the fridge has symmetrical vents, it works well. I figure it was better to reflect the radiant heat away from the fridge than to try to reflect the "coolth" back at the fridge...



    Cheers
    Numb Thumbs
    That's interesting. I'm not sure which way to go on that.
    The compressor must be able to vent heat or it could overheat. The heat comes out the vent, but the wall of the fridge also gets hot. The silver inside of the cover would repel compressor heat and force it along the gap between the fridge wall and the cover towards the vent holes in the cover.
    The sun would be absorbed by the insulated cover with the grey side out.
    So which side should face outwards - the grey insulation or the silver?
    Is the silver layer actually double-sided, so no matter which way it is fitted there are silver layers facing both in and out?
    I'm not sure. What do others think?

Page 3 of 3 FirstFirst 123

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!