arb locker change over

**F4Phantom** · 31st May 2011, 10:02 AM

guys, I have an 87 RRC with 10 spline rear diff and axles, I also have a trashed 97 disco on my lawn with an ARB locker which I want to put into the RR. So the question is, what is the easiest/fastest/best way to do the transfer, either by taking out the arb diff and drill a hole in the RRC diff to install it, then put in the 24 spline axles etc.. or by ripping the whole disco diff out and swapping the complete unit?

thanks

**isuzurover** · 31st May 2011, 10:09 AM

Easiest and cheapest will be to swap the whole axle disc-disc. (assuming it is straight).

**Grimace** · 31st May 2011, 11:08 AM

What he said!

you get the upgrade (minor) to 24spline. Another thing to confirm is the CW&P ratios are the same between the two vehicles.

**F4Phantom** · 31st May 2011, 11:15 AM

thanks guys, yeah I may have to change the input shaft too to make sure it matches the diff, but the ratios should all be the same?

Thread: arb locker change over

Thread Tools

arb locker change over

Bookmarks

Bookmarks

Posting Permissions