Reply With QuoteReasonably easy. Unclip the the back of the binnacle and look for the bigger plastic bulb holders (use a mirror ) . Twist and remove. Then remove the bulb itself - it should be a T10 and is available at most Auto stores (including LED versios).
Master
SupporterHello all .
Anyone replaced blown globes in the instrument binnacle on their old rangie classic .
Whats involved and can I buy the globes ?
Not the warning lights but the lights which light up the tacho and speedo and my fuel gauge is in darkness . looks like about 3 globes may be out .
Wizard
Reasonably easy. Unclip the the back of the binnacle and look for the bigger plastic bulb holders (use a mirror ) . Twist and remove. Then remove the bulb itself - it should be a T10 and is available at most Auto stores (including LED versios).
Master
SupporterThanks Langy . Great helpOriginally Posted by langy
ForumSage
Be VERY careful to avoid damaging the flexi circuit board while the cover is off. They tend to be not so flexi with a bit of age.
DL
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks