Results 1 to 3 of 3

Thread: starter motor for classic

  1. 15th January 2012, 12:17 PM #1
    Banjo_pluker's Avatar
    Banjo_pluker
    Banjo_pluker is offline Master
    Join Date
    Sep 2008
    Location
    Kootingal
    Posts
    464
    Total Downloaded
    0

    starter motor for classic

    Hi all,

    I have a 1990 classic which needs a new starter. It has the 3.9 motor with a 4l block

    I have a 1988 classic for parts with the 3.5 injected motor,

    will the 3.5 starter motor fit the 1990 model car?

    thanks all,
    Reply With Quote Reply With Quote
  2. 15th January 2012, 01:11 PM #2
    PLR
    PLR is offline Wizard Supporter
    Join Date
    Jan 1970
    Location
    3960
    Posts
    1,161
    Total Downloaded
    0
    Hi ,

    yes it should , they are all interchangeable up to the P38a , there may be a slight difference in the wiring but just wire as the one it`s going in .

    Only suggestion i`d make is check it on the bench first and take note of the condition of the drive teeth .

    If they are both reduction drive and one says lucas and one says marrelli you`ll find they are as good as the same thing and parts interchange .

    Peter
    Reply With Quote Reply With Quote
  3. 17th January 2012, 02:05 PM #3
    Banjo_pluker's Avatar
    Banjo_pluker
    Banjo_pluker is offline Master
    Join Date
    Sep 2008
    Location
    Kootingal
    Posts
    464
    Total Downloaded
    0
    thanks for that, they checked out ok,

    only wiring difference is that RR I took the good starter motor off had about 3 extra wires.

    Works fine. It has slight differences in apearance but seems to work fine.

    thanks for the info

    Banjo
    Reply With Quote Reply With Quote
« P76 V8 for RRC question | Concealed-hinge bonnets »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!