Gauge Locations for 93 classic.

Quote:

---

Originally Posted by milld

Could it be possible that a slightly rich mix might be better for the 3.9 as I've heard that the standard 14cux produces a mix that is too lean and that may be a cause of blocks cracking/ loose liners etc. Not sure on the truth of this though. I have the unichip so it's already mapped out. I'm not getting an ounce of any smoke under revs when hot. Not really a good test but if it was rich I should see some black smoke. mmmmm interesting.

---

The only true way of telling your mixture is to fit an oxygen sensor, preferably a wide band with matching controller. Another gauge for you????

Hey Beeutey, heres a picture of my WB Stato street drag car's console
2 digital displayed EGT's Left and Right bank(all 8 connected up)
1 Digital AFR wide band , switchable left and right bank PLX3000 Petrol/LPG/Meth/Diesel
3 temp gauges ,engine water,engine oil temp,Trans ATF Temp(Im wrong ,the bottom Left is Trans Clutch Pressure)
Volts,engine oil pressure,vacuum.
plus adjustable on the fly Spark retard Crane TR2 and Hi-6
And seeing it only run Straight LPG , no Fuel Pressure gauge!!
You like that idle AFR of 15.9 ?
https://www.aulro.com/afvb/images/im...015/02/413.jpg

Quote:

---

Originally Posted by p38arover

I've got a fibreglass gauge pod that John E Davis Motorworks (now Davis Performance Landys) made for the dash top on hard dash Rangies. I can't find a pic on the 'net.

---

So, today, I finally got around to taking pics. If I can find an RRC, I'll put it on the dash and take some pics.

Ahh, that's what I'm looking for.... now I'll have to get on the blower and find out if they still have any...

If not, I wonder if anyone can make a mould off mine. It's unused.

(I could - I used to make fibreglass model race boats.)

I wouldn't make a mould if Davis still sells them as that would be unethical.

I'll find out tomorrow and let you know...

I would like one pod like that, put me in your customers lists :)

PS: with the condition that the mould that you are going to purchase it is not faulty :p

Quote:

---

Originally Posted by 400HPONGAS

https://www.aulro.com/afvb/images/im...015/02/413.jpg

---

Looks good except that I wouldnt want to be taking my eyes off the road (looking down) when checking the gauges. This is why I placed mine at dash level so that at the very least its a glance, then still got peripheral vision. Yes its a disco interior but same principal for RRC

https://www.aulro.com/afvb/images/im...015/02/414.jpg

Did you make that pod or did you buy it? Looks good

Quote:

---

Originally Posted by Corgie Carrier

Did you make that pod or did you buy it? Looks good

---

Made it from scratch... here are some pics of the process. Of course like anything, you do it the first time and then realise there was a better way to cut this, or fold that, drill etc etc.