Isn't the offset shown in the casting, i.e., 33mm which is standard for an RRC, D1, and Defender? They are standard RRC alloys. They should have something like 8Jx33x16 on them.
Does any one know what offset these wheels are as i want to fit them on a d1 whith 265 rubber on them so hoping for same off set as standard disco![]()
Isn't the offset shown in the casting, i.e., 33mm which is standard for an RRC, D1, and Defender? They are standard RRC alloys. They should have something like 8Jx33x16 on them.
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
cannot tell you the offset, but are original wheels for the Hiline/Vogue Classic Rangie
They are a 16 x 7 rim, with standard offset, pretty sure its 33 as previously mentioned. They are available in both tubed and tubeless.
98 Harvey the tractor - 300 tdi Defender Wagon
84 Alfetta GTV
Thanx GuyG that's the answer in looking for!!Originally Posted by GuyG
7Jx16x33.
I have one on the floor right next to me.![]()
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
So, if the original poster had looked at his rims, he'd have seen that?![]()
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
As the original poster I would like to clarify that I took the pic from a gumtree ad and I did not have the rim. I was only told what rims they were over the phone, the person selling them could not tell me the off setOriginally Posted by p38arover
Thankyou all that replied you helped heaps it's good to know that when you ask a question that the right answers come through
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks