Results 1 to 6 of 6

Thread: Replacement alternator for '88 3.5 with tacho

  1. 18th September 2012, 10:04 AM #1
    hiker's Avatar
    hiker
    hiker is offline Master Subscriber
    Join Date
    Jan 1970
    Location
    Bellarine Peninsular
    Posts
    156
    Total Downloaded
    0

    Replacement alternator for '88 3.5 with tacho

    Hi all,

    Looking to replace existing (faulty) Prestolite alternator and wondering what I should be looking for. I've been advised to look for an Italian subsitute ??

    many thanks in advance
    2016 Firenze Red Disco 4 TDV6
    ... plus many previous!
    Reply With Quote Reply With Quote
  2. 18th September 2012, 11:12 AM #2
    langy's Avatar
    langy
    langy is offline Wizard
    Join Date
    Jan 1970
    Location
    Somewhere else, QLD
    Posts
    1,863
    Total Downloaded
    0
    Start here

    http://www.aulro.com/afvb/classic-ra...lternator.html

    And then google bosch alternator in range rover classic

    there are a quite a few options
    Reply With Quote Reply With Quote
  3. 18th September 2012, 06:16 PM #3
    Homestar's Avatar
    Homestar
    Homestar is offline Super Moderator & CA manager Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    20,105
    Total Downloaded
    0
    Yep go the Bosch. If you are handy with a soldering iron, you can put the 'W' terminal in it to run the tacho - it's not hard to do. Check out this site - it has a good 'how to' for this - How to add a "W" terminal to your alternator

    Cheers - Gav
    If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.
    Reply With Quote Reply With Quote
  4. 20th September 2012, 02:05 PM #4
    hiker's Avatar
    hiker
    hiker is offline Master Subscriber
    Join Date
    Jan 1970
    Location
    Bellarine Peninsular
    Posts
    156
    Total Downloaded
    0
    Many thanks for the replies

    Have had a look & read the links and have also found AAE Wholesalers with a list of Bosch alternators. Just quickly, can anyone point me to the Bosch replacement ref?

    many thanks again
    2016 Firenze Red Disco 4 TDV6
    ... plus many previous!
    Reply With Quote Reply With Quote
  5. 20th September 2012, 06:52 PM #5
    PhilipA
    PhilipA is offline Swaggie Subscriber
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    From what I can see, a ARB1077 or ARB 1078 should be good, or an ARB1165 , but the pulley in all cases would need to be Vbelt. I am assuming the distance between the vpulley is similar in all but I do not really know, so you should measure the distances from your current alternator.

    Mine was from a Magna
    You will probably not be able to get a pulley as small as the OE Lucas Magneti Marelli.
    I suggest you buy from an auto electrician as they can fit a pulley from their pulley box and fit the W wire for you.
    Regard sPhilip A
    Reply With Quote Reply With Quote
  6. 21st September 2012, 09:24 AM #6
    hiker's Avatar
    hiker
    hiker is offline Master Subscriber
    Join Date
    Jan 1970
    Location
    Bellarine Peninsular
    Posts
    156
    Total Downloaded
    0
    thanks PhilipA
    Will check in with auto electrician.
    2016 Firenze Red Disco 4 TDV6
    ... plus many previous!
    Reply With Quote Reply With Quote
« Front Diff / Axle dead. Suggestions ? | RR classic »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!