Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22

Thread: The dreaded upper tailgate

  1. #11
    Join Date
    May 2006
    Location
    Woolgoolga
    Posts
    7,870
    Total Downloaded
    0
    Doing mine at the moment, out of the 4 uppers I have, 2 good, 2 stuffed, the strip that the lower rubber goes in are all knackered. I could cut and shut one out of a few good sections, but a new one would be better.
    Does anyone know if they are available?

  2. #12
    Join Date
    Sep 2013
    Location
    Darwin
    Posts
    1,632
    Total Downloaded
    0

  3. #13
    Join Date
    Oct 2011
    Location
    Sunshine Coast
    Posts
    1,202
    Total Downloaded
    0
    I fitted the Ritters tailgate strut kit back in late eighties and never had issue with tailgate opening. Still have kit on old car it is one of parts I am retaining It located struts down towards lower tailgate on body, with attachment on upper moved up much closer towards hinges. Worked a treat. And will again with luck!

  4. #14
    Join Date
    Dec 2014
    Location
    FNQ
    Posts
    1,016
    Total Downloaded
    0
    Digging this one up as it's probably too late for the OP, but maybe for future candidates...

    There are different upper tailgate seals and an additional rubber stopper on lower tailgates in certain VIN's.

    I learned this after purchasing a Maxidrive alloy tailgate frame, and after pondering over it for a couple months, discovered that the "kit" as supplied is missing two very much required parts - that being the (lower-frame section) tailgate seal channel and the upper tailgate top c section that sits on the outside of the frame.

    Everything else in the maxidrive kit is useful - bolts, nuts, rivets etc all stainless steel. there is no hardware included - i.e. no tailgate strut parts or latch or handles etc - all that is supposed to come from your own donor upper tailgate -

    which brings me to the obvious -

    Make sure everything on your tailgate you plan on redeploying is 100% serviceable, before you embark on the project. Or, order all the parts you know you will need. Matters not if the frame's rusty or the seal's kaput.
    You will likely need the lower seal channel, (I learned this a bit too late) and the seal (300 bucks for a new one right now) and if you have any issues with rusty strut hinges or strikers etc, factor in new replacements for those too.

    I was trawling famous four's website yesterday looking for the necessary lower seal channel, and they have an alloy replacement, which looks like extrusion you could get from a local alloy supplier here - but without a profile, you'd be clutching at straws.

    That's when I noticed there are two different seals - early/late and an additional rubber bumper stop which affixes to the lower tailgate on certain RRC's up to a GA prefixed Vin. Since that did not apply to my case I kept on searching around and found that their website does do some mutual exclusion by way of selecting pre/post 85 models, and yet many parts are identical to both.

    Regardless of how you undertake the project, know that it's not as straightforward as some may have you believe.

    Heated rear glass? yeah add headliner removal to the task.
    central locking? yep, more wiring to be cautious of and more things to break when disassembling
    high-mount stop light? more potential to break plastic and succumb to rust-infested bracketry
    strut problems? sorth those out before you contemplate removing the upper tailgate. It will save you frustration

    If it weren't for the fact that my lower corners were rusting at the join, I'd probably have not bothered with the Maxidrive frame... but it is one impressive locally made piece of kit and for that reason alone it belongs on the car.

    I just wish they had included the lower seal extrusion in their kit - would have saved a lot of frustration and delay.
    Roads?.. Where we're going, we don't need roads...

  5. #15
    3toes is offline Wizard Silver Subscriber
    Join Date
    Nov 2008
    Location
    Knaresborough North Yorkshire UK
    Posts
    1,822
    Total Downloaded
    0
    Have you fed your experience back to them so they might improve the product

  6. #16
    Join Date
    Dec 2014
    Location
    FNQ
    Posts
    1,016
    Total Downloaded
    0
    Next time I drive out to the redcliffe peninsula I am sure to let them know.

    They might not want to hear what I have to say though. Spare parts retailers often have a very different view.

    We all know about profit before people attitude that is so prevalent in modern society.

    I'd simply rather see some more clarity in their product description and the 1-page instruction, stating that the kit specifically doesn't come with the additional parts which are likely to be completely stuffed, so check the condition and purchase additional required parts if necessary.

    the fact that the tailgate rubber channel is completely hidden until the rubber is removed (which is not the ideal time to discover that you need a new channel) is where this unravels.

    It's not a complaint, it's simply stating facts.

    In order to achieve the desired outcome of successful tailgate frame replacement, the manufacturer should ensure that the parts list and instruction set are comprehensive enough to enable the individual who is using it, to clearly determine what additional parts may be required through a quick guided assessment. For the most part, the vendor in this case states what is not included in a single sentence in the middle of the procedure.

    Also, mixing stainless fasteners with alloy frames and reusing old (perhaps rusting) existing steel parts in combination, is a galvanic corrosion nightmare waiting to happen, and not everyone has a bucket of tef-gel at their disposal, So there are a few oversights occurring here.

    The product is good - and I'm sure more people would buy them so long as the installation instructions were a little more comprehensive (they are positively skeletal) and the product description on the website was a little more detailed - I would suggest they recommend purchase of additional parts to ensure a less 'difficult' installation.

    I could think of quite a few additional sundry items to include in a 'kit' to make it more comprehensive, however, there is a point at which the inclusion of sundry parts could change a package's dangerous goods status, or become cost-prohibitive or both.

    Some people would look for a used tailgate as a more cost-effective substitute in this scenario, but that's not really the most economical solution either (unless it's free) because sooner than later it too will suffer the same issue as existing, and individual is back at square one.

    That's not the most practicable solution for someone who's entertaining the notion of keeping the vehicle longterm.

    There's no harm in bringing these observations to the attention of the manufacturer - but again, experiences of vendors past tell me these things are just wholesale ignored.
    Roads?.. Where we're going, we don't need roads...

  7. #17
    Join Date
    Oct 2011
    Location
    Fremantle WA
    Posts
    3,742
    Total Downloaded
    0
    Quote Originally Posted by Mercguy View Post
    Next time I drive out to the redcliffe peninsula I am sure to let them know.

    They might not want to hear what I have to say though. Spare parts retailers often have a very different view.

    We all know about profit before people attitude that is so prevalent in modern society.

    I'd simply rather see some more clarity in their product description and the 1-page instruction, stating that the kit specifically doesn't come with the additional parts which are likely to be completely stuffed, so check the condition and purchase additional required parts if necessary.

    the fact that the tailgate rubber channel is completely hidden until the rubber is removed (which is not the ideal time to discover that you need a new channel) is where this unravels.

    It's not a complaint, it's simply stating facts.

    In order to achieve the desired outcome of successful tailgate frame replacement, the manufacturer should ensure that the parts list and instruction set are comprehensive enough to enable the individual who is using it, to clearly determine what additional parts may be required through a quick guided assessment. For the most part, the vendor in this case states what is not included in a single sentence in the middle of the procedure.

    Also, mixing stainless fasteners with alloy frames and reusing old (perhaps rusting) existing steel parts in combination, is a galvanic corrosion nightmare waiting to happen, and not everyone has a bucket of tef-gel at their disposal, So there are a few oversights occurring here.

    The product is good - and I'm sure more people would buy them so long as the installation instructions were a little more comprehensive (they are positively skeletal) and the product description on the website was a little more detailed - I would suggest they recommend purchase of additional parts to ensure a less 'difficult' installation.

    I could think of quite a few additional sundry items to include in a 'kit' to make it more comprehensive, however, there is a point at which the inclusion of sundry parts could change a package's dangerous goods status, or become cost-prohibitive or both.

    Some people would look for a used tailgate as a more cost-effective substitute in this scenario, but that's not really the most economical solution either (unless it's free) because sooner than later it too will suffer the same issue as existing, and individual is back at square one.

    That's not the most practicable solution for someone who's entertaining the notion of keeping the vehicle longterm.

    There's no harm in bringing these observations to the attention of the manufacturer - but again, experiences of vendors past tell me these things are just wholesale ignored.


    Excellent post. And your point about second hand being an interim step for those wishing to keep these treasures is particularly pertinent.

    I cant think of a better, more qualified person than you to start a sticky thread on this, which can then be added to by others?
    MY16 D4 TDV6 - with a little Cambo magic for towing "The Brick"
    MY95 RRC LSE Vogue Softdash "Bessie" (turning circle comparable to QE II) with MY99 TD5 and 4HP24 transplants. Back home Nov 22 after a magic overhaul by Chivalry
    SADLY SOLD MY04 D2a TD5 auto Classic and MY10 D4 2.7 both with lots of goodies

  8. #18
    Join Date
    Dec 2014
    Location
    FNQ
    Posts
    1,016
    Total Downloaded
    0
    Haha Gav, flattery will get you nowhere LMAO

    I'll compile a list of part numbers pertinent to the job, I have them already tabled somewhere, but right now I'm juggling work, a cranky RRC and an interstate relocation which hasn't reached it's pivot (we're mid-way travelling). I'll give you a call before xmas to be sure.
    Roads?.. Where we're going, we don't need roads...

  9. #19
    Join Date
    Dec 2014
    Location
    FNQ
    Posts
    1,016
    Total Downloaded
    0
    Additional parts worth considering - and this is wholly based on the premise that they are available.
    At the time of this post, all the part number references I posted are available from most of the UK suppliers. In this instance I'm using alternate references from Famous Four, as they originally had the part reference I was chasing.



    MXC8420 - upper tailgate side catch RH formerly MUC3296
    MXC8421 - upper tailgate side catch LH AKA MTC1739 ?
    MTC2398 - Rubber Seal for Body Frame to Tailgates
    MXC8422- Top Tailgate Bottom Rubber Seal
    Use with metal retaining strip FF002053 (aka MTC7553AL)
    MTC7553 - rubber seal channel for MXC8422 - FF use an AL suffix on this part number to determine that it is an aluminium extrusion, and not the pressed steel LR part.

    Diagram below and within the code window are the part references along with current GBP price and availability from Jaguar Land Rover Classic
    Genuine Tailgate Assembly-upper For Land Rover Range Rover Classic 1992 - 1994 (from Ja610294) Classic | Jaguar Land Rover Classic Parts

    Screenshot 2022-12-08 at 2.03.14 pm.jpg
    Code:
    1	
    Tailgate assembly
    Also serviced as part of a kit,'Classic Part'
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    ALR4637
    £2,071.43 inc VAT
    Out of Stock
     
    FROM VIN MA647645
    ALR6229
    £1,280.99 inc VAT
    Out of Stock
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    ALR4852
    £2,102.22 inc VAT
    Out of Stock
     
    FROM VIN MA647645
    ALR6230
    £1,296.00 inc VAT
    Out of Stock
     
    2	
    Glass-Green backlight
    Also serviced as part of a kit,'Classic Part'
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    MXC1377
    £432.56 inc VAT
    Out of Stock
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    MXC5791
    £775.30 inc VAT
    No Longer Available
     
    3	
    Tailgate frame
    Also serviced as part of a kit
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    NLS
    Out of Stock
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    NLS
    Out of Stock
     
    4	
    Seal-tailgate
    Also serviced as part of a kit,'Classic Part'
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    RTC4264
    £23.99 inc VAT
    No Longer Available
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    RTC4264
    £23.99 inc VAT
    No Longer Available
     
    5	
    Drain channel
    Also serviced as part of a kit,'Classic Part'
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    MWC9493
    £8.77 inc VAT
    No Longer Available
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    MWC9493
    £8.77 inc VAT
    No Longer Available
     
    6	
    Bracket
    Also serviced as part of a kit,RH,'Classic Part'
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    MXC1382
    £13.03 inc VAT
    Out of Stock
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    MXC1382
    £13.03 inc VAT
    Out of Stock
     
    Also serviced as part of a kit,'Classic Part',LH
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    MXC1383
    £20.94 inc VAT
    Out of Stock
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    MXC1383
    £20.94 inc VAT
    Out of Stock
     
    7	
    Screw
    Also serviced as part of a kit,'Classic Part'
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    SF604127
    £2.83 inc VAT
    No Longer Available
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    SF604127
    £2.83 inc VAT
    No Longer Available
     
    8	
    Washer-Plain
    Also serviced as part of a kit
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    WC702101L
    £0.48 inc VAT
    
    
    
    
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    WC702101L
    £0.48 inc VAT
    
    
    
    
     
    9	
    Nut - Hex.
    Also serviced as part of a kit,'Classic Part'
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    RTC3953
    £6.20 inc VAT
    No Longer Available
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    RTC3953
    £6.20 inc VAT
    No Longer Available
     
    10	
    Rivet
    Also serviced as part of a kit,'Classic Part'
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    RTC3954
    £1.60 inc VAT
    No Longer Available
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    RTC3954
    £1.60 inc VAT
    No Longer Available
     
    11	
    Hinge assembly-tailgate
    Also serviced as part of a kit,RH,Upper
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA629455
    390084
      ↳
    ALR4638
    
    
    £78.68 inc VAT
    No Longer Available
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA629455
    390084
      ↳
    ALR4638
    
    
    £78.68 inc VAT
    No Longer Available
     
    Also serviced as part of a kit,Upper,LH
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA629455
    390085
      ↳
    ALR4639
    
    
    £72.98 inc VAT
    No Longer Available
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA629455
    390085
      ↳
    ALR4639
    
    
    £72.98 inc VAT
    No Longer Available
     
    Also serviced as part of a kit,RH,'Classic Part',Upper
    Less High Mounted Stop Lamp,With Central Locking System
    FROM VIN KA629456
    ALR4638
    £78.68 inc VAT
    No Longer Available
     
    Less Central Locking System,With High Mounted Stop Lamp
    FROM VIN KA629456
    ALR4638
    £78.68 inc VAT
    No Longer Available
     
    Also serviced as part of a kit,'Classic Part',Upper,LH
    Less High Mounted Stop Lamp,With Central Locking System
    FROM VIN KA629456
    ALR4639
    £72.98 inc VAT
    No Longer Available
     
    Less Central Locking System,With High Mounted Stop Lamp
    FROM VIN KA629456
    ALR4639
    £72.98 inc VAT
    No Longer Available
     
    12	
    Screw-torx-countersunk
    Also serviced as part of a kit,'Classic Part'
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    MWC9605
    £1.02 inc VAT
    Out of Stock
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    MWC9605
    £1.02 inc VAT
    Out of Stock
     
    13	
    Washer-copper
    Also serviced as part of a kit,'Classic Part'
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    MUC3905
    £0.65 inc VAT
    No Longer Available
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    MUC3905
    £0.65 inc VAT
    No Longer Available
     
    14	
    Washer
    Also serviced as part of a kit
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    3982L
    £10.76 inc VAT
    No Longer Available
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    3982L
    £10.76 inc VAT
    No Longer Available
     
    15	
    Washer-Spring
    Also serviced as part of a kit,5/16
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    WM600051L
    £0.83 inc VAT
    
    
    
    
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    WM600051L
    £0.83 inc VAT
    
    
    
    
     
    16	
    Nut - Hex.
    Also serviced as part of a kit,1/4,nyloc,Hexagonal
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    NY604041L
    £0.86 inc VAT
    
    
    
    
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    NY604041L
    £0.86 inc VAT
    
    
    
    
     
    17	
    Clip - Brake Pipe
    Also serviced as part of a kit
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    79124
      ↳
    CRC1250L
    
    
    £1.84 inc VAT
    
    
    
    
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    79124
      ↳
    CRC1250L
    
    
    £1.84 inc VAT
    
    
    
    
     
    18	
    Seal-tailgate
    Also serviced as part of a kit,'Classic Part'
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    MXC8422
    £129.70 inc VAT
    Out of Stock
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    MXC8422
    £129.70 inc VAT
    Out of Stock
     
    19	
    Retainer
    Also serviced as part of a kit,'Classic Part'
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    MTC7553
    £40.56 inc VAT
    Out of Stock
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    MTC7553
    £40.56 inc VAT
    Out of Stock
     
    20	
    Rivet
    Also serviced as part of a kit,Aluminium,pop,0.125
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    RU608123L
    £0.89 inc VAT
    
    
    
    
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    RU608123L
    £0.89 inc VAT
    
    
    
    
     
    21	
    Clip
    Also serviced as part of a kit,'Classic Part'
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    MRC7257
    £8.22 inc VAT
    Out of Stock
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    MRC7257
    £8.22 inc VAT
    Out of Stock
     
    22	
    Lock-tailgate
    'Classic Part'
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    MUC6938
    £49.87 inc VAT
    Out of Stock
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    MUC6938
    £49.87 inc VAT
    Out of Stock
     
    23	
    Screw
    Also serviced as part of a kit,'Classic Part'
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    SA105201
    £0.41 inc VAT
    
    
    
    
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    SA105201
    £0.41 inc VAT
    
    
    
    
     
    24	
    Lock extension
    RH,'Classic Part'
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    MXC8420
    £69.37 inc VAT
    Out of Stock
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    MXC8420
    £69.37 inc VAT
    Out of Stock
     
    'Classic Part',LH
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    MXC8421
    £70.43 inc VAT
    Out of Stock
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    MXC8421
    £70.43 inc VAT
    Out of Stock
     
    25	
    Screw
    Also serviced as part of a kit,1/4UNF x 1,'Classic Part'
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    SF604087
    £0.61 inc VAT
    Out of Stock
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    SF604087
    £0.61 inc VAT
    Out of Stock
     
    26	
    Washer
    Also serviced as part of a kit,6MM
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    WA106041L
      ↳
    WA106042
    
    
    £1.74 inc VAT
    
    
    
    
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    WA106041L
      ↳
    WA106042
    
    
    £1.74 inc VAT
    
    
    
    
     
    27	
    Nut-domed
    Also serviced as part of a kit
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    RTC1146
      ↳
    RTC3953
    
    
    £6.20 inc VAT
    No Longer Available
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    RTC1146
      ↳
    RTC3953
    
    
    £6.20 inc VAT
    No Longer Available
     
    28	
    Shield-lock
    Also serviced as part of a kit,'Classic Part'
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    MUC1987
    £2.12 inc VAT
    No Longer Available
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    MUC1987
    £2.12 inc VAT
    No Longer Available
     
    29	
    Rivet-pop-steel
    Also serviced as part of a kit,'Classic Part'
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    RA608127
    No Longer Available
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    RA608127
    No Longer Available
     
    30	
    Lock Lid
    Also serviced as part of a kit,'Classic Part',LH
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    MUC6937
    £32.92 inc VAT
    No Longer Available
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    MUC6937
    £32.92 inc VAT
    No Longer Available
     
    Also serviced as part of a kit,RH,'Classic Part'
    Less High Mounted Stop Lamp,With Central Locking System
    TO VIN KA647644
    MXC1389
    £35.20 inc VAT
    No Longer Available
     
    Less Central Locking System,With High Mounted Stop Lamp
    TO VIN KA647644
    MXC1389
    £35.20 inc VAT
    No Longer Available
     
    31	
    Handle assembly-tailgate
    Also serviced as part of a kit,'Classic Part'
    MWC8656
    £231.30 inc VAT
    
    
    
    
     
    32	
    Screw-pan
    handle to seal,'Classic Part'
    SE910441
    £1.43 inc VAT
    
    
    
    
     
    33	
    Screw-self tapping
    lock cover to seal tailgate,No 6 x 3/8
    AR606034
      ↳
    AR606031L
    
    
    £0.49 inc VAT
    
    
    
    
     
    34	
    Strut-tailgate gas
    MXC7833
    £49.54 inc VAT
    
    
    
    
     
    35	
    Seal-tailgate
    'Classic Part',LH
    391482
    £11.78 inc VAT
    No Longer Available
     
    RH,'Classic Part'
    391483
    £12.18 inc VAT
    No Longer Available
     
    36	
    Seal-upper tailgate waist
    'Classic Part'
    MUC6429
    £1.37 inc VAT
    No Longer Available
     
    37	
    Striker assembly-tailgate
    'Classic Part'
    MUC4135
    £10.68 inc VAT
    Out of Stock
     
    38	
    Shim
    'Classic Part'
    391373
    £1.46 inc VAT
    No Longer Available
     
    39	
    Screw
    striker to shim,1/4UNF x 1,'Classic Part'
    SF604087
    £0.61 inc VAT
    Out of Stock
     
    40	
    Seal
    'Classic Part',LH
    MWC3347
    £4.49 inc VAT
    No Longer Available
     
    RH,'Classic Part'
    MWC3348
    £4.49 inc VAT
    No Longer Available
     
    41	
    Sleeve
    'Classic Part'
    589818
    £10.37 inc VAT
    No Longer Available
     
    42	
    Bracket
    'Classic Part'
    589130
    £1.78 inc VAT
    No Longer Available
     
    43	
    Screw
    bracket to seal,Self Tapping,No 8 x 3/8
    AB608031L
    £0.48 inc VAT
    
    
    
    
     
    44	
    Cover harness
    'Classic Part'
    MXC1379
    £24.55 inc VAT
    No Longer Available
     
    45	
    Clip
    'Classic Part'
    MXC1378
    No Longer Available
     
    46	
    Handle assembly-tailgate
    Black,'Classic Part'
    BTR6740PUB
    £51.72 inc VAT
    No Longer Available
     
    47	
    Label-warning
    MWC6223
    £0.83 inc VAT
    No Longer Available
     
    900	
    Hinge assembly-tailgate
    RH,'Classic Part',Upper
    Less High Mounted Stop Lamp,With Central Locking System
    ALR4638
    £78.68 inc VAT
    No Longer Available
     
    Less Central Locking System,With High Mounted Stop Lamp
    ALR4638
    £78.68 inc VAT
    No Longer Available
     
    901	
    Operating probe
    Roads?.. Where we're going, we don't need roads...

  10. #20
    Join Date
    Oct 2011
    Location
    Fremantle WA
    Posts
    3,742
    Total Downloaded
    0
    Quote Originally Posted by Mercguy View Post
    Haha Gav, flattery will get you nowhere LMAO

    I'll compile a list of part numbers pertinent to the job, I have them already tabled somewhere, but right now I'm juggling work, a cranky RRC and an interstate relocation which hasn't reached it's pivot (we're mid-way travelling). I'll give you a call before xmas to be sure.


    If you want something done quickly, give it to a busy person GRIN!!

    Might be worth adding the mod (or at least a reference) to keep the door from jumping open ie reverse mounting points so the struts are working to keep the frame closed?
    MY16 D4 TDV6 - with a little Cambo magic for towing "The Brick"
    MY95 RRC LSE Vogue Softdash "Bessie" (turning circle comparable to QE II) with MY99 TD5 and 4HP24 transplants. Back home Nov 22 after a magic overhaul by Chivalry
    SADLY SOLD MY04 D2a TD5 auto Classic and MY10 D4 2.7 both with lots of goodies

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!