Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 24

Thread: Interior trim pieces - where to buy?

  1. #11
    Join Date
    Dec 2014
    Location
    FNQ
    Posts
    1,016
    Total Downloaded
    0
    I don't mind the look of that guys console, especially the single piece section for the lower dash area with the DIN mount radio. Pity there is no further follow-up on it. Even if he wasn't producing consoles anymore it'd be nice to have a cut list.

  2. #12
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    This console seems well thought out & provides extra storage:


    Range Rover Classic Centre Console in Werribee, VIC | eBay
    Scott

  3. #13
    Join Date
    Feb 2013
    Location
    Ballarat,Vic,Aus
    Posts
    3,580
    Total Downloaded
    0
    Has anyone tried these kits?

    37 Piece Walnut Or Carbon Fibre Dash Kit Range Rover Classic 1986-1995 RHD/LHD | eBay

    Tacky looking, but it appears to be a "shell" that would cover over all the smashed, melted and holed plastic

    seeya,
    Shane L.
    Proper cars--
    '92 Range Rover 3.8V8 ... 5spd manual
    '85 Series II CX2500 GTi Turbo I :burnrubber:
    '63 ID19 x 2 :wheelchair:
    '72 DS21 ie 5spd pallas
    Modern Junk:
    '07 Poogoe 407 HDi 6spd manual :zzz:
    '11 Poogoe RCZ HDI 6spd manual

  4. #14
    Join Date
    Dec 2014
    Location
    FNQ
    Posts
    1,016
    Total Downloaded
    0
    Might be OK - Never know until you try it.
    Roads?.. Where we're going, we don't need roads...

  5. #15
    Join Date
    May 2009
    Posts
    3,394
    Total Downloaded
    0
    You cant beat these, fiberglass and trimmed in Vinyl to match your stock interior. I had this console in my 89 RRC, Solid and good looking. http://www.lrautomotive.com.au/contents/en-us/d652.html
    Attached Images Attached Images

  6. #16
    Join Date
    Feb 2013
    Location
    Ballarat,Vic,Aus
    Posts
    3,580
    Total Downloaded
    0
    Quote Originally Posted by blackrangie View Post
    You cant beat these, fiberglass and trimmed in Vinyl to match your stock interior. I had this console in my 89 RRC, Solid and good looking. Console RR Classic
    Very nice .... You don't mind paying decent money for a quality product
    Proper cars--
    '92 Range Rover 3.8V8 ... 5spd manual
    '85 Series II CX2500 GTi Turbo I :burnrubber:
    '63 ID19 x 2 :wheelchair:
    '72 DS21 ie 5spd pallas
    Modern Junk:
    '07 Poogoe 407 HDi 6spd manual :zzz:
    '11 Poogoe RCZ HDI 6spd manual

  7. #17
    Join Date
    May 2018
    Location
    Burleigh Heads
    Posts
    11
    Total Downloaded
    0
    Quote Originally Posted by GuyG View Post
    What year is your rangie? I have the wooden parts from a 91 rrc. And possibly a console also
    Mate are those trim items still avail by any chance?

    Cheers

  8. #18
    GuyG's Avatar
    GuyG is offline ChatterBox Silver Subscriber
    Join Date
    Jan 1970
    Location
    Brisbane
    Posts
    2,001
    Total Downloaded
    0
    Pretty sure I still have them. Somewhere under the house. Think there is aircond under dash bit, gear surround and possibly window switch panel
    98 Harvey the tractor - 300 tdi Defender Wagon
    84 Alfetta GTV

  9. #19
    Join Date
    Oct 2018
    Location
    NSW highlands
    Posts
    146
    Total Downloaded
    0

    Range Rover interior trims

    Are these of any interest?

    I purchased them as a "backup" set and no longer need them $200 asking price is $50 less than I paid for them. The other picture is my original set after refinishing with Myrtle veneer
    Attached Images Attached Images

  10. #20
    Join Date
    Feb 2013
    Location
    Ballarat,Vic,Aus
    Posts
    3,580
    Total Downloaded
    0
    Hi All,

    I'm starting to put the shiny ****boxes dash back together. when I picked up the radio surround, it cracked across the top, allowing one half of it to twist down and break in half (wow the quality of the plastic is appalling). I have already repaired this in the past by pop riveting the broken bits together, but it's broken beside the metal strapping and pop rivets (much like the center console),.

    has anyone come up with a smart way of fabricating new consoles/radio surrounds... or repairing these? (modifying a similar console/radio surround would be best).

    It looks like the plastic maybe ABS. As I managed to get some ABS welding rod to stick to it. This is a very short term and ugly repair if I manged to weld it back together though.

    seeya,
    Shane L.
    Proper cars--
    '92 Range Rover 3.8V8 ... 5spd manual
    '85 Series II CX2500 GTi Turbo I :burnrubber:
    '63 ID19 x 2 :wheelchair:
    '72 DS21 ie 5spd pallas
    Modern Junk:
    '07 Poogoe 407 HDi 6spd manual :zzz:
    '11 Poogoe RCZ HDI 6spd manual

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!