Thread: Meet Max

Maybe they screwed those covers on in case they thought you might want to stick the sill tanks in at some point? Maybe give them a quick call to let them know that’s not in the plans?

It’s going to look great when it’s done. 👍👍👍

Originally Posted by Homestar

Maybe they screwed those covers on in case they thought you might want to stick the sill tanks in at some point? Maybe give them a quick call to let them know that’s not in the plans?

It’s going to look great when it’s done. 👍👍👍

Spoke to them - they screwed them on as a temporary measure, so that they can weld them in.. All good!

Well we have a minor update... I went down to the panel beater a few weeks ago, and all of the welding had been done - stupidly I did not take any pictures.

The panel beater has told me that the car will be done by the end of the month - which is fine by me, as I am still cleaning-up the shed it preparation for it's return.

Remember that this is a closed door re-spray - well the panel beater told me that because the RRC has exposed interior body parts, he will be painting those as well.

True to his word - he's done that where the tools are mounted:

rr1.jpg

Cheers,
GG

So - it's been way too long since I have done any of the small jobs left over, but seeing as the car is coming back soon I figured that I should make a start.

Firstly - I had sanded back the top tailgate, in preparation for painting.. It's been a while and now it is covered in light surface rust..



An hour or so or sanding - and once side clean again:



Next - I was never happy with the paint that the fabricators put on the front window brackets. You can see runs in the paint and also some of the paint has already started to come off - considering these have been sitting in a box inside the shed for a year, I was a tad disappointed.



An hour or so of sanding (in some areas the paint fell off very easily, other areas were harder):



And now some primer:





Next step is to do the other side of the tailgate - sand & prime.

Cheers,
GG.

The Panel Beater just sent through these pictures...

Remember that it's a closed door re-spray, so technically he didn't have to do anything under the bonnet..

















Cheers,
GG.

looking good!

Originally Posted by grey_ghost

The Panel Beater just sent through these pictures...


Cheers,
GG.

That's looking really good. Are they colour sanding to remove the orange peel ?

Originally Posted by DoubleChevron

That's looking really good. Are they colour sanding to remove the orange peel ?

I went and inspected the car this week (the panel beater provided those photos).

They haven’t colour sanded it yet.

I found a few small runs in the paint also - which they will rectify. (As an amateur it kind of made me feel good that the pros make mistakes also).

I am not sure if I would have asked a customer to inspect the car before it was finished though?

They have has the car for a long time with Covid - perhaps they just wanted to show me that they have made some good progress.

Cheers,
GG