Thread: Rescued 2 door

I really don't know why people bother with rubber bushes anymore, especially with the dubious quality of what's on offer from some sources.

Superpro (Oz made) are about as soft as rubber, beautifully designed and engineered and last a loooooooong time and don't need a press for replacement.

Heaps of converts on this forum.

Sad thing is that Mario and Heather probably couldn't even buy a full set of them for what Paddocks can do:

SuperPro Polyurethane Bush Kit - Range Rover Classic to 1985 - pre EFI - Paddock Spares

cheers, DL

Cheers, wouldn't put aftermarket rubber bushes in , I figured the originals lasted for around 35 years , so went with genuine, although I ordered superpro for the Panhard for as well , I've found them to be good in all applications except things like lower control arms in disco/range Rover Sport where hydrolastic are the go. So today I gave the old lady a bit of a 4wd workout to stretch her old bones , test out diff lock , low range etc which she handled with aplomb, came across a young crew who wanted to see what it was so I thought, why not have a bit of fun . Told them a story about them having a starter motor as an option only which this one didn't have, and proceeded to get the crank handle out when one of them said they wanted to have a go , I then watched as one of them broke in to a sweat trying to show his strength in front of his mates, I ended up showing him with one turn of the crank handle, but I felt a little guilty not turning the ignition on for him ( it's ok I know them :-) anyhow after turning it off , saying bye bye and starting it with the key we all had a laugh and I stopped and took a couple of pics. Before I forget, Shane , did you make sure you had the vehicle weight supported on its axles before tightening up the bush bolts, if you tightened them up while it was supported by the chassis, even genuine bushes wouldn't last long.

I have one thing to say......I hate you....LOL
such a lovely looking original..Am so so jealous.

Ooh, the burning jealousy . . . anyway, the point Shane was trying to make in his very own inimitable way is that rubber parts, even Genuine, these days aren't what they used to be and so can be pretty risky. I've read somewhere that Genuine Parts are being made in India these days, though I haven't looked into it at all.

Originally Posted by Davo

Ooh, the burning jealousy . . . anyway, the point Shane was trying to make in his very own inimitable way is that rubber parts, even Genuine, these days aren't what they used to be and so can be pretty risky. I've read somewhere that Genuine Parts are being made in India these days, though I haven't looked into it at all.

Nah I haven't had time to do anything ... anywhere. So long as the damn car starts and moves under it's own power ... that is all that matters for the next few months. THings are crazy here. We spent three months this year on holidays travelling north in the old Rangey towing the block of flats north with the kids (I had long service leave). While we were away, one of the copper hoses froze and burst in our house roof ... Luckily my brother found it ... so it probably only flooded the house for 3 or 4 days. But now we are living in a holiday house in Ballarat ... 10minutes drive from our house. I do have access to my sheds down there.... but gee's everything is happening so bloody slowly. We are hoping to be back into our house by christmas. Hey at least the mold remediation is finally done so the house can be put back together.

working on the car I'm driving as a daily is "impossible". I have half of our houses contents (that were't damaged) spread through the sheds and a shipping container down there.

seeya,
Shane L.

seeya,
Shane L.

Originally Posted by discorevy

Cheers, wouldn't put aftermarket rubber bushes in , I figured the originals lasted for around 35 years , so went with genuine, although I ordered superpro for the Panhard for as well , I've found them to be good in all applications except things like lower control arms in disco/range Rover Sport where hydrolastic are the go. So today I gave the old lady a bit of a 4wd workout to stretch her old bones , test out diff lock , low range etc which she handled with aplomb, came across a young crew who wanted to see what it was so I thought, why not have a bit of fun . Told them a story about them having a starter motor as an option only which this one didn't have, and proceeded to get the crank handle out when one of them said they wanted to have a go , I then watched as one of them broke in to a sweat trying to show his strength in front of his mates, I ended up showing him with one turn of the crank handle, but I felt a little guilty not turning the ignition on for him ( it's ok I know them :-) anyhow after turning it off , saying bye bye and starting it with the key we all had a laugh and I stopped and took a couple of pics. Before I forget, Shane , did you make sure you had the vehicle weight supported on its axles before tightening up the bush bolts, if you tightened them up while it was supported by the chassis, even genuine bushes wouldn't last long.

yeah, the bushes are just ****house. Don't use the aftermarket rubber bushes. I'm running the original 30year old panhard bush in it still.... and blocking my ears to the various clunks and bangs around the car..... It still drives quite ok at the moment either way.

seeya,
Shane L.

Looks fantastic I need to get off my bum and get mine finished pity work/life keeps interfering with best laid plans

What a Great looking old truck and Kudos to you for saving it from getting scavenged for parts at the wreckers.
Well done Mate