30-40kg max without the hand brake. I can easily pick one up off the floor and lift it onto a bench.
Ok, scenario is like this.
I'm stripping out a LT230T out of a crashed RRC, it's on it's side (drivers side doors) chained to another vehicle as an anchor.
I'm at the point of unclipping the plugs and disconnecting the levers before pulling out the last couple of bolts holding the mount's to the chassis.
I can't jack it up in a "normal" situation, so I will be pulling it out and onto a stand.
So my question is, what's the LT' weigh? I'm confident that I will be able to lift it but I just don't want to have a unexpected 100kg when I was thinking of around 50-70kg.
Thanks for your time
Lee
30-40kg max without the hand brake. I can easily pick one up off the floor and lift it onto a bench.
Thanks bee utey,
Much appreciated
[QUOTE=barnfindseries3ffr;2792474] I was thinking of around 50-70kg/QUOTE]
Probably a bit late with info, but approx 64kg with hand brake, no fluids. You could pull the centre diff cover and assembly, and the input gear to lighten it.
I got it out about 30 mins ago, not too heavy, I had the front shaft and hand brake attached too.
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks