Page 4 of 4 FirstFirst ... 234
Results 31 to 38 of 38

Thread: Lt 95 gearbox problem HELP!

  1. #31
    Join Date
    Aug 2018
    Location
    Sweden
    Posts
    17
    Quote Originally Posted by Blknight.aus View Post
    usuing the airchisel gets you about a squillienty movements a minute, the rubber strap hold the shaft backwards (which is the direction you want it to be going in) the air chisel drives the shaft forwards just a fraction so as you turn it and vibrate it it will work the shim around in a semi random fashion.

    if youve got on a micro orbital sander will do a similar thing in providing the vibration that lets the shim "wander"
    Ok!☺ i will try this . Hope it will work👍
    Thanks again for all help. .. karl.

  2. #32
    Join Date
    Jun 2006
    Location
    Hay Point
    Posts
    3,724
    Quote Originally Posted by Blue sweden View Post
    Aah😊 ok. Seems little strange to put some force with an airchisel to hammering it forward again. I will use some strap to hold it backwards during the hammering as you said. 👍. Lucky enough i have great patience😁 thanks again.
    Haha yes, patience is something that is definitely needed.
    Cheers......Brian
    1985 110 V8 County
    1998 110 Perentie GS Cargo 6X6 ARN 202516 (Brutus)

  3. #33
    Join Date
    Aug 2018
    Location
    Sweden
    Posts
    17
    Quote Originally Posted by Bearman View Post
    Haha yes, patience is something that is definitely needed.
    😁😁😁. Home now after a few hours in the garage. I tried with an micro orbital sander and pulled the mainshaft at the same time. But no no no😈. The mainshaft still stuck.😥
    Maybe its easier to put the gearbox up on the bellhousing and then try to get the mainshaft backwards. I dont want to totally dismantle the gearbox to fix this😭.

  4. #34
    Join Date
    Aug 2018
    Location
    Sweden
    Posts
    17
    YEEEEEEEEESSSS😃😃😁.
    at last!!! The trust bearing found its right place on the mainshaft. The transfer gear and shim and snap ring is now fitted.im sooooo f... happy😃😃😃😃😃😃. Thanks alot you dearest land rover friends in australia.
    Bearman you are fantastic!
    Kindest regards from the norweigan who living in sweden. Karl the viking😁.

  5. #35
    Join Date
    Jun 2006
    Location
    Hay Point
    Posts
    3,724
    Quote Originally Posted by Blue sweden View Post
    YEEEEEEEEESSSS😃😃😁.
    at last!!! The trust bearing found its right place on the mainshaft. The transfer gear and shim and snap ring is now fitted.im sooooo f... happy😃😃😃😃😃😃. Thanks alot you dearest land rover friends in australia.
    Bearman you are fantastic!
    Kindest regards from the norweigan who living in sweden. Karl the viking😁.
    Yippee, well done Karl (the viking)
    Cheers......Brian
    1985 110 V8 County
    1998 110 Perentie GS Cargo 6X6 ARN 202516 (Brutus)

  6. #36
    Join Date
    Aug 2018
    Location
    Sweden
    Posts
    17
    Quote Originally Posted by Bearman View Post
    Yippee, well done Karl (the viking)
    😀😀😀👍👍. Yes bearman. Patience sir patience. 😁. Learning all the time.
    Again thanks for all help. Happy karl😃

  7. #37
    Join Date
    Oct 2011
    Location
    Sunshine Coast
    Posts
    816
    Great to hear! Bearman is a legend my LT95 with his center diff is working just fine Lt 95 gearbox problem HELP! But could use an overdrive Lt 95 gearbox problem HELP!

  8. #38
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland
    Posts
    4,539
    The LT95 Oracle. Lt 95 gearbox problem HELP!
    L322 tdv8 poverty pack - wow
    Perentie 110 wagon ARN 49-107 (probably selling) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
    Perentie 110 wagon ARN 48-699 another project
    Track Trailer ARN 200-117
    REMLR # 137

Page 4 of 4 FirstFirst ... 234

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!