Something you don't see everyday.

It may be set up like a Sandringham Land Rover Sandringham 6, 6x6, Series 3, Stage 1 V8, Original Factory Build

Quote:

---

Originally Posted by Mercguy

I'd like to see how they did the pto - second diff housing propshaft alignment in the RRC, that would be pretty interesting to see.

on the perenties, I think they rotated the housing so the pinion angle was raised above horizontal and a two-piece shaft came form the secondary drive on the gearbox.

Not an expert on those by any stretch - but I also thought that the (LT77? or is it LT95?) gearbox had an integrated transfer case on the 6x6's with two rearward output shaft flanges.

Do those 4 speed boxes have a PTO in addition to the twin rear drive, or are they simply using the PTO and the standard rear drive?

This could actually make for a very interesting modification to an RRC ute... if one were to "extend" the tray...

---

This is a 6x6 Ex Army box, I don't know if this would be the same setup as on the Rangie.
As you can see, the drive for the third axle comes off the PTO and is vacuum switched, the same as the centre diff switch.
And so they can run a PTO winch, the winch drive is run off the bottom of the transfer.

Cheers, Murray

Attachment 146426 Attachment 146428

Interesting it's a 2 door and the tail lights are 2 door. How old is this thing? I can't read the ad.

DL