Results 1 to 8 of 8

Thread: Change to fine spline?

  1. 23rd November 2009, 09:01 AM #1
    big guy's Avatar
    big guy
    big guy is offline ChatterBox
    Join Date
    Apr 2007
    Location
    Prospect SA
    Posts
    2,131
    Total Downloaded
    0

    Change to fine spline?

    Just checking when the change was in RRC's to fine spline.

    From memory it was not an exact date as per typical Land Rover but from 89 onwards with the VC springs to mind.
    Can anyone confirm that as my mate wants to know what he has and as he is doing a Isuzu upgrade likes to keep a spare.
    Reply With Quote Reply With Quote
  2. 23rd November 2009, 12:02 PM #2
    Rangier Rover Guest
    May have been in late 93 to 94.
    Reply With Quote Reply With Quote
  3. 23rd November 2009, 03:43 PM #3
    langy's Avatar
    langy
    langy is offline Wizard
    Join Date
    Jan 1970
    Location
    Somewhere else, QLD
    Posts
    1,863
    Total Downloaded
    0
    I have an 89 RR, and it still has the ten spline axles.

    Get your mate to look at the axle ends on the rear: Rounded is ten spline, flat is 23.
    Reply With Quote Reply With Quote
  4. 23rd November 2009, 04:22 PM #4
    buzz66's Avatar
    buzz66
    buzz66 is offline Master
    Join Date
    Jan 2009
    Location
    Gold Coast home of Maxi Drive
    Posts
    365
    Total Downloaded
    0
    Was after 1990 but i don't know when exactly
    Reply With Quote Reply With Quote
  5. 23rd November 2009, 04:59 PM #5
    dobbo's Avatar
    dobbo
    dobbo is offline OldBushie
    Join Date
    Jan 1970
    Location
    Close enough to their Shire to smell the dirty Hobbit feet
    Posts
    8,059
    Total Downloaded
    0
    93 from memory. Naturally the dif, stub axles and CV are different. The Radius arms may be slightly wider as well,(or is that just the 110 and D1) you may get away with the older radius arms and a big bloody washer.
    Reply With Quote Reply With Quote
  6. 24th November 2009, 08:14 AM #6
    Bush65
    Bush65 is offline YarnMaster
    Join Date
    Jan 1970
    Location
    'The Creek' Captain Creek, QLD
    Posts
    3,724
    Total Downloaded
    0
    I'm going to say 94.
    Reply With Quote Reply With Quote
  7. 24th November 2009, 08:55 AM #7
    Psimpson7's Avatar
    Psimpson7
    Psimpson7 is offline TopicToaster
    Join Date
    Sep 2007
    Location
    Gold Coast
    Posts
    6,078
    Total Downloaded
    0
    Im going with about 93.
    Reply With Quote Reply With Quote
  8. 27th November 2009, 06:29 PM #8
    Dougal
    Dougal is offline ForumSage
    Join Date
    Sep 2007
    Location
    Kiwiland
    Posts
    7,246
    Total Downloaded
    0
    If it's got ABS, it's gotta have the later style axles.

    However, I've seen photos of later style axles (look like 24 spline from the outside) which have 10 spline diffs in them.
    So you probably can't guarantee anything from the outside.
    Reply With Quote Reply With Quote
« EAS compressor seal - where to get? | heater resistor »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!