Perentie front diff/axle housing

nothing special about a generic front perentie diff.

Quote:

---

Originally Posted by Blknight.aus

nothing special about a generic front perentie diff.

---

Thanks for clearing that up Dave, did the Army ever bend them? Mabey they arnt that weak after all.

Quote:

---

Originally Posted by taylorslandy

Thanks for clearing that up Dave, did the Army ever bend them? Mabey they arnt that weak after all.

---

On the weighbridge it says I have 2500 kg,s on the front axle of mine and I dont seem to have bent it yet.
Though I worry about the strength of the neck of the swivel housings. (chrome balls)

Didiman

Quote:

---

Originally Posted by taylorslandy

Thanks for clearing that up Dave, did the Army ever bend them? Mabey they arnt that weak after all.

---

i dont recall seeing any bent....i did however have to panel beat the fronts and weld patchs after the crown wheel had worn a hole in it

Quote:

---

Originally Posted by taylorslandy

Hi perentie gurus, I'm after some info on if and how the front axle housing is braced/strengthened on the army 110's. If they are strengthened a few photos would be great please. I have an isuzu 130 and are going to strengthen the front diff housing, looking for ideas.
Cheers, Andrew.

---

Worked alongside the Army tech adviser for B Vehicles in the late 80's. We discussed this at one time. He advised that all Isuzu front axle housings are strengthened internally with a pressed in tube (laminated). No visible sign exists external to the housing. If you put a 4bd1 in a non Isuzu landy, then you should fit the front axel along with it. Hope this helps.