After much appreciated Aulro deliberation and discussion (and a measurement of the drum in my garage) I put RX Super in the Gearbox and Transfer Case.
Heaps smoother and quieter than that brown army stuff that came out of the plug holes.
Printable View
After much appreciated Aulro deliberation and discussion (and a measurement of the drum in my garage) I put RX Super in the Gearbox and Transfer Case.
Heaps smoother and quieter than that brown army stuff that came out of the plug holes.
Picked up my Landy after getting powersteering fitted. And also a new clutch slave cylinder.
Really enjoyed my drive home.
Bruce
Fitted boat racks, and HAZ/Insulation kit. Which as greatly Improved the reduction in noise, some slight fiddly bits as mines got the higher rops, and I will need to loosen the boat racks to get the rear straps over the bar.
https://www.aulro.com/afvb/images/im...014/06/965.jpg
https://www.aulro.com/afvb/images/im...014/06/966.jpg
https://www.aulro.com/afvb/images/im...014/06/967.jpg
https://www.aulro.com/afvb/images/im...014/06/968.jpg
https://www.aulro.com/afvb/images/im...014/06/969.jpg
Looking good, Juddy!
Decided to organise the rego inspection this week, so did a quick onceover of the lights - had one headlight looking a little dim so decided to fit a new globe - WRONG!
Wiring and plug is melted around the 90/130 globe (I wonder why!) and the back literally fell off the headlight assembly :(
Tried 3 places for replacement headlight - none in stock so found a new set on fleabay from Narva. Will go looking for the replacement 3 pin plastic plug, but I suspect a fair amount of rewiring will be needed judging by the melted wire. Will also put in a high and low beam relay now that I have to.
Bugger!
Attachment 79988
5 star accommodation
Perentie style
Couldn't agree anymore,
Didn't get much say in the matter of tiger skin haha bed fits two :)
The boards sit straight on top of the battery box, with the handles of the box itself there prevent any damage or scratching, and I originally made a support for where the seat was but ended up not using it as the board is strong enough to support the both of us. Attachment 80037Attachment 80038