Speaking as (probably) the only person in this thread who has actually done this;
Yes you can, no you don't need to bodge it up.
Retain the top door channels with the curved windscreen corner pieces. You will need a piece of flat ally bar as an adapter for the screen/ roof join as the roof has an 'overbite' and own't line up perfectly. You will need some fill in pieces between the door gutter pieces and the roof. 75-100 wide rubber would work well.
The roof and side bracing will need to be trimmed around the ROPS bars and hoop frames.
Retaining the ROPS bars unmodified will also require a fill in piece between roof and sides or sides and tub. approx 50mm.
Will it look factory? NO
Will it look ok if executed with care? Hell yes!
