Winch PTO Uni Joint Gone Missing

Quote:

---

Originally Posted by Demo

Hi Hardy Spicer 49 Banksia Rd Welshpool Perth 92586300

---

Ordered it yesterday from them. Really good customer service and very knowledgeable. All up the parts came in at around $170. Should be good to pick up next week as the slip yoke has to come from the East Coast. Will post some images once I have it fitted.

Thanks everyone for your help. I used the part numbers supplied Simon and found out that Hardie Spicer is the go to company for uni joints. What a great resource AULRO is!!! Thank you to all the passionate Land Rover owners out there who are willing to help fellow enthusiasts.

Regards Warrick.

Hi all, I have recently been through this setting up my PTO winch on my 109 from scratch.

I made the setup to fit a thomas T8000 winch from a perentie.

I purchased parts from driveline services australia, they were very helpful. Contact Us | Driveline

Parts are imperial specification.

Yokes: 3/4" shaft with 3/16" keyway (I was supplied neapco brand at about $35 each) part number 10.4.13 (neapco 10-0413)
UJ's: 5.170X (5-170X) about $35ea also

I Got a greasable 'pillow block bearing' from RS spares au, it was cheap, there are similar items on ebay etc.

I had the shafts made locally at a fitter and turners workshop.

Attachment 144672