GS tie down points

Quote:

---

Originally Posted by archieaja

You can get a very similar thing (but more heavy duty) from Bunnings in galv steel. Mine were in terrible shape too so I replaced all six with these.

Much better quality than the ones the army used.

Grunt 530kg Galvanised Heavy Duty Recessed Rope Mount | Bunnings Warehouse

---

You had to drill new holes in the floor to fit these, yes? That's what I'm trying to avoid.

You would have to drill new holes yes. I replaced my whole rear floor with 4mm check plate so I had to drill new holes either way.

An old thread but does anyone know if you are able to source the original sized lash down rings located on the tub floor of the RFSV?

Would like to replace mine otherwise I will try blasting and possible galvanising if there is enough metal left.

Regards Warrick.

Quote:

---

Originally Posted by wpalmo

An old thread but does anyone know if you are able to source the original sized lash down rings located on the tub floor of the RFSV?

Would like to replace mine otherwise I will try blasting and possible galvanising if there is enough metal left.

Regards Warrick.

---

Somebody once told me that you can get them at Bunnings.. (You can get the locker keys there - much cheaper than from the LR sellers)…