Results 1 to 9 of 9

Thread: Oil Filter????

  1. #1
    Join Date
    Mar 2015
    Location
    stanthorpe
    Posts
    38
    Total Downloaded
    0

    Oil Filter????

    Ok, after browsing this site looking for the oil filter part number as I cant see a number on the existing filter I have found 2 completely different parts.

    Here is one number listed which is Isuzu 8943212191
    Which crosses to a Donaldson P550422

    Then have found Z333, LF3522
    Which crosses to a Donaldson P550389

    Both the Isuzu, Ryco and Fleetgaurd numbers where found on this site but are completely different sizes when crossed over to Donaldson.

    Or is it a case of there are actually two different filters on these beasts?

  2. #2
    Join Date
    Mar 2015
    Location
    Brisbane
    Posts
    570
    Total Downloaded
    0

  3. #3
    Join Date
    Mar 2015
    Location
    stanthorpe
    Posts
    38
    Total Downloaded
    0
    That's actually where I got the Isuzu number from was that drop box file

    heres the page with the other numbers
    http://www.aulro.com/afvb/isuzu-land...reference.html

  4. #4
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    Quote Originally Posted by Trigger82 View Post
    ...

    Or is it a case of there are actually two different filters on these beasts?
    Bingo. Or actually 3 if you include the civvie version.

    The 4x4s AFAIK had a large single upright spin on filter. The Z333 and equivalents is the full flow filter in the dual filter setup - which was fitted to trucks - and maybe 6x6(?)

  5. #5
    Join Date
    Mar 2015
    Location
    Brisbane
    Posts
    570
    Total Downloaded
    0
    My comment that went along with that link disappeared for some reason.
    Those numbers in that post from me are correct and what I have used to order parts.

    The 4x4 has a single oil filter, the 6x6 has a dual filter setup.

  6. #6
    Join Date
    Mar 2015
    Location
    stanthorpe
    Posts
    38
    Total Downloaded
    0
    Thanks again,
    So I'll run the P550422 which is the equivalent to Isuzu 8943212191

  7. #7
    Join Date
    Jun 2014
    Location
    Waitakere, New Zealand
    Posts
    1,270
    Total Downloaded
    0
    Quote Originally Posted by Trigger82 View Post
    Thanks again,
    So I'll run the P550422 which is the equivalent to Isuzu 8943212191
    I have used this part number (P550422) from Dondaldson and have issues with the anti-drain back valve. It seems a bit hit and miss though as others haven't had this problem.

  8. #8
    Join Date
    Mar 2015
    Location
    stanthorpe
    Posts
    38
    Total Downloaded
    0
    Cheers, will keep an eye on the light time after startup.
    Bit strange that their a hit and miss though

  9. #9
    Join Date
    Jan 1970
    Location
    Toowoomba QLD
    Posts
    1,132
    Total Downloaded
    0
    Quote Originally Posted by BadCo. View Post
    I have used this part number (P550422) from Dondaldson and have issues with the anti-drain back valve. It seems a bit hit and miss though as others haven't had this problem.

    Same issue here with a Fleetguard - oil light stayed on at start up for a lot longer than I'd like due to the ADBV not doing its job.
    Ditched the new filter and fitted an Isuzu filter and all is good again. Even after a few weeks of non use, the Isuzu filter will hold its oil.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!